-
Anonymous users2024-01-24According to your description, you should buy K11 waterproof slurry, this material only needs to mix the liquid and powder according to the proportion, and you can't add water or cement sand, otherwise it will affect the final waterproof effect. Here are some of the more common construction methods:
1. Clean the base surface, free of oil and dust, and sprinkle water to fully moisten.
2. Pour a bag of liquid material into the empty barrel first, and then slowly add a bag of powder, stir evenly without agglomeration. Let the slurry stand for about 3 minutes, then stir well before use.
3. Use a stiff brush to evenly brush the slurry on the base surface, and should be cross-brushed twice, and the second construction can only be carried out after the first surface is dry. The thickness of each layer is about, and the total thickness of the waterproof layer is about. Use a stiff bristle brush to evenly coat the slurry onto the substrate.
-
Anonymous users2024-01-23Powder is a waterproof coating, liquid is an adhesive, the two are mixed and scraped with a scraper, that is, a waterproof layer, generally scraped two or three times, during which it is necessary to wait until the upper and lower parts are slightly dry and then scraped down. If the viscosity is too high and it is not easy to scrape, you can add some water appropriately. ......Satisfied!
-
Anonymous users2024-01-22According to the instructions, first open the liquid and pour it into the container, pour the powder in proportion to the ...... a small amount of waterStir well and paint.
1. Of course, you can do it yourself, the main details are to deal with the ground dust and cement blocks first, and then use the plugging treasure to do a special treatment of the pipe root, floor drain and wall corner, the wall corner is the yin and yang angle to make an arc, the pipe root and the floor drain mouth is best to open a U-shaped small groove to fill the leakage treasure, and then do a waterproof coating primer to further deal with the floating dust and impurities on the ground. After 2 hours of drying, a large area of waterproof paint is painted 2 times, and after 8 hours of drying, put some water to do a water avoidance experiment, 24 hours to see if there is a leak downstairs, and finally it is to do cement and interface agent to paste tiles, and the above is the construction process. >>>More
First of all, there is no settling tank on the bathroom floor, if there is no settling tank, you can use polymer with white cement to brush the ground, but it is not recommended to use it like this, the general ground is recommended to do one-component polyurethane waterproof coating, you can use rainbow SPU-301
Hello, the bathroom is waterproof or painted, it lasts much longer, and it is easy to make and will not be missed.
Make your own waterproofing and brush polyurethane waterproof paint. >>>More
At present, the management of the building materials market is not standardized, and there are many fake and shoddy products on the market. The real environmentally friendly waterproof material should have the Ten Ring Certification or CTC Environmental Protection Certification and Product Certificate. >>>More