The toilet bowl can t bounce up, what should I do? Can you fix it yourself?

The spring in the bucket is rusty、Drain the water and put oil on the movable shaft around the spring

Alas, this only needs to change the parts inside, close the main gate of the water valve at home, which is generally available at home, and then remove the accessories inside, go to the hardware store to buy an identical replacement on it, if you don't understand, find a boy to help you get it, the structure is very easy.

It should be broken, go to the hardware store and buy one and replace it. Just change it yourself, if you don't understand, there are illustrated tutorials on the Internet.

First of all, it is necessary to determine the cause of the damage of the button, which is that there is a foreign object between the circlip sleeve and the button, which causes the main version of the button card to be damaged. Remove the lid of the water tank, check whether there is any foreign object in the gap between the circlip sleeve and the button, if there is no foreign object found in the gap on the surface, press the button with your fingers to feel whether there is a slight rebound force, if there is, then use a slender wire inserted into the gap between the four sides to stir up, so that the foreign object trapped in the middle can be stirred off. If there is no slight rebound, then the circlip is broken, in this case, you can only replace the circlip, look at the brand and model of the toilet, and go to the mall to buy the corresponding circlip replacement. >>>More

1. Check whether the toilet is aging After using the toilet, if there is no water or the water pressure is not enough when flushing, the dirt in the toilet will not be flushed away. Slowly, the dirt inside the toilet will block the place where the toilet turns and cause the toilet to clog. If it is determined that the reason for the aging of the toilet is causing the blockage, then there is no need to repair it, and it is better to replace it with a new one! >>>More