Yesterday, the electrical installation of the socket in the control bathroom of my house tripped, an

Updated on Bathroom 2024-09-12
4 answers
  1. Anonymous users2024-01-24

    There is load leakage.

    Check method: The washing machine, water heater, and hair dryer are all unplugged, push on the electricity, and then plug in the washing machine, water heater, and hair dryer in turn to see who caused the trip. You will know who is leaking, and then check the specific leakage load. In general, there is a greater chance of electricity leakage in the washing machine.

  2. Anonymous users2024-01-23

    1. Unplug all electrical appliances first to see if they trip If they jump, check the line and focus on the bathroom to see if they are grounded or leaking.

    2. If you don't skip the elimination method, connect the electrical appliances and start running for a period of time, which jump will have a problem, if you plug in, it will jump, indicating that the machine has a short circuit inside If you trip after running for a period of time, it indicates that the power is too large The line can not withstand the solution is to change the line If you plug in and start for a period of time without jumping, then turn on the machine for a period of time at the same time If you trip indicates that the power is too large, the solution is to change the line or not use it at the same time.

  3. Anonymous users2024-01-22

    The reason for tripping is generally a short circuit or leakage, your phenomenon is leakage, electrical appliances, electrical sockets have the possibility of leakage, unplug the electrical appliances from the power supply, return them, carefully check the socket and related wiring.

  4. Anonymous users2024-01-21

    First of all, it is not the protector itself that is damaged, and then disconnect the electrical appliances one by one, if it does not jump, it is broken, and if it does not jump, there is a problem with the line.

Related questions
No electricity in the bathroom outlet?
7 answers2024-09-12

1. Check whether the switch function is normal in the electric box to the bathroom, if the switch is easy to use, turn off the switch, remove the outgoing wire, use a table or other methods to measure the two wires, and find out which line is broken. >>>More

Bathroom socket does not have electricity The socket in the hall has electricity, and the leakage in
2 answers2024-09-12

It's either a short circuit or it's flooding. Because there is water vapor in the bathroom.

There is no electricity in the bathroom socket in my house, and the red wire has electricity, and th
2 answers2024-09-12

Thank you! I'm the questioner just now, the air switch, there is electricity on it, and there is no electricity when you plug it in! That's a broken switch, then I'll buy a new one!

How many squares are used for socket wires, kitchen sockets and bathroom socket wires
2 answers2024-09-12

Socket wire, kitchen socket and bathroom socket wire are used how many square meters of kitchen and bathroom electricity consumption is relatively large, according to 4 kilowatts calculation, the working current is 4 square copper wire through the plastic pipe safety current is 22A, so use 4 square copper wire. >>>More

The leakage protector that controls the toilet socket line at home is broken, and it is a dz47le on
3 answers2024-09-12

Take-off current: 20A for C20 and 32A for C32

The maximum negative load of your washing machine should not exceed 1000 watts. >>>More