-
Anonymous users2024-01-24Thank you! I'm the questioner just now, the air switch, there is electricity on it, and there is no electricity when you plug it in! That's a broken switch, then I'll buy a new one!
-
Anonymous users2024-01-23If there is electricity at the upper end of the air switch, replace the air switch.
The incoming circuit breaker is closed The circuit breaker of the socket circuit is also closed If the circuit breaker of the socket circuit is also closed, it is definitely the line and the circuit breaker are not connected Find an electrician to dismantle it Your distribution box will be connected to you It will not be where the leakage is If the leakage is leaking, the circuit breaker of the outgoing line cannot be pushed.
Start with the distribution box: remove the wiring heads (or empty openings) of each other room, and test them separately to see which one it is. Then go to that room or route, check each socket one by one, you can finally determine the problem, and then eliminate it!
Because it is a shunt wiring, the situation is normal, but the air opening (circuit breaker) that controls the "sockets in the kitchen and living room" tripped. You unplug all the appliances plugged in to the sockets in the kitchen and living room, go to the main distribution box and push the tripping gate on.
Find an incandescent lamp that can be lit, plug it into all the sockets in the bathroom, the light is on, it means that the socket power supply is good, the light is not on, it means that there is a problem with the socket power supply, it may be that the zero line is broken. Find a professional electrician to repair it.
1. Check whether the switch function is normal in the electric box to the bathroom, if the switch is easy to use, turn off the switch, remove the outgoing wire, use a table or other methods to measure the two wires, and find out which line is broken. >>>More