No electricity in the bathroom outlet?

Updated on Bathroom 2024-03-29
7 answers
  1. Anonymous users2024-01-23

    1. Check whether the switch function is normal in the electric box to the bathroom, if the switch is easy to use, turn off the switch, remove the outgoing wire, use a table or other methods to measure the two wires, and find out which line is broken.

    2. If it is a regular decoration, there are threading pipes, disconnected at both ends, connect a new set of wires, draw out the old wires, and the new lines will return to normal after they are connected as they are.

    3. If you really can't figure it out, you can go to the property or go directly to the water and electricity master. They'll be good to help out.

  2. Anonymous users2024-01-22

    It may be that there is a certain problem with the cable of your socket, or your socket is not connected properly, or it is possible that you still find an electrician to help you take a look.

  3. Anonymous users2024-01-21

    If it is a separate road, check the electrical box to see if the air switch is falsely connected, and check whether the socket is pressed with the wire skin when installed.

  4. Anonymous users2024-01-20

    1. In this case, it is most likely a circuit problem, or it is possible that the first socket line is open.

    2. Use a multimeter 250V AC file to check whether the bathroom is empty to see if there is electricity and whether the voltage is normal.

    3. Check whether the first socket has electricity, if you don't know which socket is the first, then check them one by one.

    4. Check the socket with a voltage tester and then use a multimeter to check the voltage, if the empty voltage is normal, and the socket is not fired, it may be a live wire problem.

    Question: The toilet socket of the residents in the community is out of power, and the socket in the hall is normal.

    The question socket comes with a waterproof housing.

    Answer: Sometimes fog can get into the socket. My home is also equipped with a waterproof shell, and the mist emitted by the hot bath in winter sometimes invades into it, and there is a problem with the socket, but it is not excluded that other possibilities are recommended to ask professional maintenance workers to check Oh dear.

    Ask how to determine where the problem is.

    Sanitary napkin line issues.

    Answer hello dear, the general situation is which of the possibilities I listed above If you still can't judge which one, it is still recommended to contact an electrical repairman to check it will be safer.

    No matter what, you still have to put safety first [flowers] [flowers] [flowers].

  5. Anonymous users2024-01-19

    It could be that the gate of yours is not closed.

  6. Anonymous users2024-01-18

    Check whether there is electricity or no power in other sockets in the room: check whether the main power switch and socket switch are connected (usually the switches in the switch box include: main switch, socket switch, lighting switch, air conditioning switch, etc.); If there is electricity: as follows.

  7. Anonymous users2024-01-17

    There is no electricity in the bathroom socket, you can find an electrician to let him cool you down, there is a special meter for measuring electricity, the effect is particularly good, see where there is no electricity can only find out the reason, and you can connect the wire well.

Related questions
1 answers2024-03-29

The line has been going on for a long time, and the socket connector is a little loose, you first turn off the air switch, and then unscrew the two screws in front of all the sockets in the kitchen, tighten the screws in the terminal on the back of the socket, and then turn on the air switch after installation. >>>More

5 answers2024-03-29

The renovation of the blank room changes the height of the kitchen and bathroom socket, the kitchen post socket is not less than one meter and four sentences from the ground, the stove is not less than 65 points, and the height of a socket next to the ground is not less than 60 points.

5 answers2024-03-29

For use in the bathroom, the socket suitable for the electric water heater first meets the power supply, and the requirement is 16A socket, and then in terms of waterproofing, there must be a cover plate to achieve the splash-proof effect.

5 answers2024-03-29

The main switch forgot to turn on, if there is no socket, it must be the electrician has a problem, the wiring is not very good, so the quality of the electrician is very important, otherwise it will affect the whole house, the structure of the whole house, how miserable it is.

3 answers2024-03-29

Other socket wiring is open or damaged.

Depending on how the wiring is designed, your bathroom and balcony should be under the same wiring control. The rest of the non-energized sockets should be in the same line control, you see whether the air opening of your home control line is damaged, or whether the wire head at the air switch is obviously burned, if so, it may have burned out the air open, please replace the air open. If the empty opening is good, it should be caused by the poor contact of the open circuit at the connection of the non-energized main line, please check. >>>More