There is no socket on the wall of the bathroom, how to install a smart toilet?

You can get a plug from the outside, or you can go to a construction company and ask someone to change the wiring of the circuit.

You can connect another socket from the line, or pull a socket to come over.

You can ask a professional person to design it, or you can pull the wire at the top to install the socket.

You should choose a good designer to set up the bathroom when you decorate.

We can consider using a top-wired socket Let's take a closer look!

The round plastic tube is wound with the wire, which has good waterproof performance. The semi-circular arc trunking may have better aesthetics, but the gap between the bottom plate and the cover plate is easy to cause moisture to the wire, affecting the service life.

Advantages: It is relatively convenient to use an open-wire socket and the cost is relatively low.

Disadvantages: The aesthetics of the bathroom will be affected, which can easily cause safety problems. Since the indoor environment of the bathroom is generally humid, although the exposed wires are not directly exposed, once the wires are aged, it is easy to short-circuit, so care should be taken when installing and using exposed wire sockets.

The refurbishment of professional lines is safe, but it will affect the appearance.

Reuse live wires along the threading pipe from the bathroom heater or the lights on the ceiling to the switch socket, bypassing the switch knife and connecting it 10 cm under the toilet tank, so that the laying distance is minimal.

The old house should be equipped with a smart toilet seat, and the plumber master can also ask to modify the wiring of the bathroom.

The laying line of the smart toilet seat makes it possible to reuse a live wire from a bathroom heater or lamp in the ceiling along the conduit to the switch socket, bypassing the switch knife and connecting it to 10 cm below the toilet tank. In this way, not only the laying distance is minimized, but also the water pipes laid in the bathroom walls are prevented from being affected.

If the consumer's previously decorated toilet outlet is equipped with two sets of wires, the toilet lid power cord can also be connected externally from the electrical outlet on the basin. One set of wires from this power supply is used for bathroom balconies and light fixtures, while another set of wires previously reserved can be connected to the smart toilet lid.

The above is about how to install a smart toilet, I hope it will help you!

If you don't have a socket in front, you can connect a line to install a socket and install a toilet.

Personally, I suggest that you can find a friend who understands this thing to fix it.

You can get a plug in from the outside, or find someone to install the electrical wiring, but it's too much trouble.

It is recommended that you go to the construction company and ask a special person to change the circuit wiring.