-
Anonymous users2024-01-24For example, the kitchen is 3 meters long and 3 meters wide. 3 meters high. The wall area should be the perimeter of the kitchen multiplied by the height (and then the area excluding the doors and windows is about 31.
It mainly depends on the size of your window. The area of the door is basically more than one square meter. In the end, the wall is about 22 square meters.
The ground area is one square.
Then divide the wall area by the area of the brick you have chosen. For example, the brick is 300*450 = the ground. The same is true for the bathroom.
The length of the bathroom is multiplied by the width.
Calculation of wall tile area: bathroom perimeter x room height = interior wall tile area. Bathroom waterproof area = ground + ground perimeter - width of door frame x 180cm. The method of wall tiles is: length and width multiplied by 2 times height. >>>More
1. The floor tile area of all bathrooms should be purchased with about 5% of the actual area, otherwise it will be insufficient.
The formula for calculating the area is: length * width.
The total area of the bathroom is the sum of the bottom area, the roof area, and the area of the four sides. >>>More
Calculation of wall tile area:
1. Bathroom perimeter x room height = interior wall tile area. >>>More
The area of the floor tile is the length * width, the wall tile is the perimeter * the actual height of the paste, the general height is 10 cm above the height of the ceiling or just a wall tile above the ceiling, the master does not want to cut, if you calculate carefully, you can deduct the area of the window, but to add the area of the window flange, it is generally the area of the flange to calculate the window, a little bit will not be bothered with the master, but the wall tile can be calculated in detail, should be able to save a few bricks.