-
Anonymous users2024-01-24The formula for calculating the area is: length * width.
The total area of the bathroom is the sum of the bottom area, the roof area, and the area of the four sides.
For example, the bottom surface of the bathroom is a long, the width is b, and the bathroom is high h;
Then the bottom area and the roof area are both ab; The area of the four sides is AH on two sides and BH on two sides.
The total area is: 2AB+2AH+2BH.
-
Anonymous users2024-01-23Here's how to calculate the area of the bathroom wall:
Determine wall length and width: Measure the length and width of all walls in the restroom to calculate the area of tiles needed.
Calculate tile area: Calculate the area of tiles you need based on the size and number of tiles purchased. Usually, the area of the tile can be calculated by multiplying the wall length by the wall width.
Deduction of door and window area: If there are doors or windows in the bathroom, Changnian Travel needs to deduct its area in order to calculate the area of the bathroom wall.
Multiply by Factor: Multiply the calculated tile area by the factor to determine the total tile area required. In general, the coefficient can be determined according to the quality and price of the tile, usually .
It should be noted that the calculation of bathroom wall area needs to consider various factors, such as wall length, width, tile stool size and number, and door and window area. When calculating, adjustments should be made according to the actual situation to ensure that the calculated area is accurate.
-
Anonymous users2024-01-22Land area = length * wide wall area = ground area (stalk number) * 4 * general height of the house with a suspended ceiling) If there are windows, minus For example, the length and width are the ground area, which is 6 square meters, and the wall area is the bathroom without windows).
-
Anonymous users2024-01-21Calculating the wall area is generally to measure the length of the ground first, and then add it up to the perimeter of the entire ground, multiply it by the height of the entire bathroom wall, and get the entire bathroom wall area. If the wall is tiled, if the doors and windows are relatively small, it is recommended not to reduce, if the area is relatively large, it can be appropriately reduced by half. According to the normal theory, the general wall area is calculated and then multiplied by 8% of the loss, which is basically the area of the wall tiles.
Bathroom wall area, depending on what size of wall tiles to choose, arrange bricks according to height and width, and calculate the number of bricks according to the number of rows and the number of blocks in each row.
The length of the bathroom is multiplied by the width.
Calculation of wall tile area: bathroom perimeter x room height = interior wall tile area. Bathroom waterproof area = ground + ground perimeter - width of door frame x 180cm. The method of wall tiles is: length and width multiplied by 2 times height. >>>More
1. The floor tile area of all bathrooms should be purchased with about 5% of the actual area, otherwise it will be insufficient.
Land area = length * width.
Wall area = ground area (terrier number) * 4 * general ceiling height) - if there are windows minus such as length and width. >>>More
The labor cost is calculated according to the actual area of the bathroom (square meters), and the material cost needs to add a little loss, and the number of losses is more or less, which is related to the size of the bathroom and the specifications of the gusset, which can be determined by "actual settlement".