What to do if the bathroom window size is higher than the ceiling

Updated on Bathroom 2024-08-01
3 answers
  1. Anonymous users2024-01-24

    This situation should be divided into 2 kinds, one is that if your window is fixed, you can use a staggered way to hang the ceiling, along your glass, and the second is if your window is active, it is the kind that is to be opened, that is, the place where the air inlet above the ceiling is sealed with a wooden board, and then the ceiling is suspended.

  2. Anonymous users2024-01-23

    The ceiling is lifted up, and the sewer pipe on the top surface is lifted up.

  3. Anonymous users2024-01-22

    1.If it is an integrated ceiling, it is necessary for the carpenter to make the curtain box in advance. The upper cover of the curtain box is fixed on the overhang face of the window, and the width is the outer skin of the tile column from the window frame to the sewer pipe.

    The lower skin of the vertical plate of the box should be about 4 cm lower than the beam on the right side of the window frame, otherwise it will affect the installation of the integrated top keel. Look below at the curtain box made into an 'L' shape, and the right side intersects with the wall tiles. Take the corner of the tile wall as the right side to give up 1 cm, and then the subsidized tile will be level with the tile on the window side of the right wall.

    2.After the curtain box is done, the top surface is tiled, and the façade is pasted along with the wall. Glass glue, marble glue, and structural glue are all used for sticking bricks.

    After the bricks are pasted, you will see the 18 mm thick blockboard and the stubble surface of the tile about 8 mm and 2 mm thick. Measure the total thickness and add 1 mm, order a white steel buckle and stick it with glass glue.

    3.If you plan to press the gusset, the inside and bottom of the curtain box can be treated as above, or the inside can be treated with the lower corner of the gusset plate.

Related questions
1 answers2024-08-01

Do a good job of flooding the bathroom, and the floor drain is at the lowest place, which is really not good, just add a threshold at the door of the bathroom.

6 answers2024-08-01

1. When laying bathroom floor tiles, lay a joint layer with a thickness of two centimeters or less than two centimeters, and adopt a thin paste. >>>More

6 answers2024-08-01

Solution

1. If it is an integrated ceiling, it is necessary for carpenters to make curtain boxes in advance. The upper cover of the curtain box is fixed on the overhang face of the window, and the width is the outer skin of the tile column from the window frame to the sewer pipe. The lower skin of the vertical plate of the box should be about 4 cm lower than the beam on the right side of the window frame, otherwise it will affect the installation of the integrated top keel. >>>More

3 answers2024-08-01

The width of the aluminum rubber plate is more than ten centimeters, three meters long, the width is certain, the length can be cut, how can it?

3 answers2024-08-01

In home feng shui, each room has its specific feng shui functional effect, there are large and small, the living room is the main, the master bedroom is the king, the kitchen and toilet are the ministers, if the toilet floor is higher than the others, it violates the feng shui function difference, bringing the opposite effect. Therefore, we have to set it up well when decorating, so as not to raise the floor height of the toilet after decoration than other places, which will bring bad home feng shui. >>>More