How to solve the most critical toilet displacement in the bathroom decoration?

In the bathroom decoration, some owners feel that the location of the toilet made by the developer is not ideal, so they want to change it according to their own ideas, which is the saying that the toilet is displaced. If your house type is not particularly bad, try not to do it, because the toilet has a certain risk of leakage. So there are several ways to do toilet displacement in the bathroom, and there are a lot of particularities in construction, whether you can change it indiscriminately and follow the precautions, let's talk about the key points that should be paid attention to when doing toilet displacement in the bathroom!

1. Toilet displacement method for bathroom decoration - toilet shifter

Let's first say that the toilet shift needs to use the toilet shifter, the toilet shifter is widely used, and it is also more convenient, there is a feature that the distance of the shift is relatively short, about ten to thirty centimeters, such a distance is better, and the cost is relatively low, many people will choose to use it. The toilet shifter horizontal tube is generally this oval shape. The overall height is about six centimeters.

Therefore, in terms of decorating the ground, even the floor heating will not have a great impact on the ground.

Toilet displacement construction steps:

1. If there is no floor heating, first slotted the ground, about two to four centimeters, put the shifter in, if there is floor heating, don't slot, just put the shift.

2. It is pre-embedded, the shifter is pre-buried, and the drain is put in the designated position.

3. Use cement for leveling, and do waterproof operation after the ground leveling is completed. The fifth step is to lay tiles, and the normal approximate height will come up six or seven centimeters. In this way, it will not have much impact on the whole decoration.

If the toilet is displaced by more than 30 centimeters, be sure to make a slope. It's best to use a wall-mounted toilet!

Second, the toilet decoration toilet displacement method - invisible water tank

Because of its relatively simple use, the toilet shifter is relatively widely used, but it has a fatal drawback, that is, his lifting distance is limited to a certain extent. Then we need another way, this way is called the invisible tank, which is the principle of hiding this tank in the wall, and then going through the sewer pipe again. In this way, an effective sewage discharge effect can be achieved.

1. Use a toilet shifter.

This method is relatively fast, but the disadvantage is that the distance is short, and it affects the drainage, etc., generally speaking, the use of toilet shifters should not exceed 10cm. In addition, the blockage problem should be considered and the tightness of the pipe should be noted, and at the same time, it should be checked several times for leakage and comprehensive leakage prevention measures.

Some suggestions: after using the toilet shifter, the toilet will be more likely to be clogged than before, and after using the toilet shifter, the sewage pipe will have more curves than before, the air pressure in the pipe will increase, it is easy to cause sewage backflow, and the flushing function of the toilet can not be fully played. Therefore, it is recommended that you do not install it unless necessary, if you have to be safe, just like the mushroom master said above, the distance is best within 10cm.

2. Re-punch the hole and move the toilet.

Dig a new hole in the ground, dig out the original sewer main pipe for backup, connect the newly purchased PVC pipe to the original main branch pipe, and change the toilet drain to the new location specified by the user.

3. Raise the ground.

Often, this is done because the bathroom is smaller and the toilet needs to be moved to leave extra space for the drain. If the toilet is changed more than 10 cm away, it is best to reinstall the plumbing and raise the bathroom to the floor by about 12 cm.

Does the toilet need to be moved during bathroom renovation? With these 3 methods, you won't be entangled after seeing it.

A professional should be hired to design the move so that the restroom can be made to the best it can be.

You can disassemble the toilet first, and then listen to the design plan of the decorator.

A professional should be found to carry out the displacement of the sewage pipe in the toilet bowl.

You can directly find the person who renovated it to repair it and listen to their opinions, you can avoid these problems.

This should be done with the toilet when decorating.

Just go to the people who are in charge of loading and unloading and listen to their opinions.

The toilet in the toilet can be moved by asking a special person to operate it.

I think I can find someone to help me fix it and take professional advice.