-
Anonymous users2024-01-24A simple and effective way to do this is to keep a bottle full of water in the tank, and the size of the bottle can be selected according to whether the toilet is flushed or not, so that you can clearly calculate how much water you are saving each time.
There are screws in the water tank on the water, and there is an iron that pinched the iron in the middle of the iron and pulled the iron upwards to adjust the low, down is high, open the upper lid of the toilet, you can see the ball linkage mechanism inside. >>>More
There is a float in each automatic flushing toilet, as the water level in the toilet rises, the buoyancy generated by the float is getting bigger and bigger, when the water level rises to a predetermined value, the buoyancy generated by the float will be transmitted to the switch through a seesaw structure, the switch is closed and then the water inlet valve will not enter the water, when the water is released, the button or wrench pulls the plug of the water discharge, and the plug is automatically pulled out. After the water is discharged, the plug automatically returns to its position under the action of the spring and enters the next round of water filling cycle.
Why did you make it yourself?
There should be a service for the installation of the device!! >>>More
Generally, the left side is a large impulse of 6L, and the right side is a small impulse of 3L, and you can choose different water output according to your needs.