-
Anonymous users2024-01-24[Structural Engineer].
In the structural design, balconies cannot be entered as cantilevered slabs. It should be composed of two cantilever beams and one edge banding beam. The board is still an ordinary board.
Can you understand? A balcony is like a room with beams on all sides, but there are no pillars at the outer corners.
Plate thickness 100 120, dead load 2, live load.
It is guaranteed to hit correctly.
Hope it helps.
-
Anonymous users2024-01-23Why are there so many air conditioners? Reinforcement method: thickening at the bottom, diagonal support below, diagonal tie rod on the top, stripping and re-pouring, etc., can be selected according to the actual situation.
For the cracks that have been generated, V-shaped grooves can be opened, and high-strength concrete pouring and repair. Of course, it is better to reduce the load. View the original post
It is recommended to have a qualified reinforcement professional use structural adhesive steel plate reinforcement. Previously, the original designer should check the site, the size of the opening, the location of the opening and other specific conditions to determine whether reinforcement is needed, or put forward a feasible reinforcement plan.
1. There is no need for double-layer two-way configuration of steel bars, and the thickness of 120mm plate only needs to be matched with the upper stressed steel bar. >>>More
What kind of house?
If it's just cracked, you can remove the epidermis and repaint it. Generally not a big problem, laying bricks is good. >>>More
The anchorage degree should be sufficient, and the floor should be doubled balcony degree, and the masonry structure cantilever beam end degree.
Be sure to consider the height, if it is too low, it may affect your life, so it is best to ask a professional to design it.