Please ask the kitchen and each bathroom wash basin hot water pipe does not produce hot water, what

1. Check whether each valve of the hot water pipeline is closed first, if it is closed, please open it;

2. If the valves of the hot water pipeline are open, then see if there is water, if there is water, it means that the pipeline is normal;

3. If the pipeline is normal, it depends on whether your water heater is working normally, turn on the hot water faucet, let the water flow naturally, and then touch the joint of the hot water pipe to see if there is temperature, if there is no temperature, it is the water heater is faulty;

4. If it is a gas burner, first look at whether your home gas is sufficient, take the gas stove to test, the gas stove can be turned on normally, that is gas, if you turn on the gas water heater and there is still no hot water, it is broken, you need to find someone to repair;

If it is a heating fault of electric heating, then pay attention to safety, cut off the power first, and then find someone to repair it.

Check that the shower valve in the bathroom is open, try to adjust the angle valve, and then wait a few minutes to test whether the water temperature is normal. If the water temperature is still cold after the angle valve is opened, check whether there is hot water in the pipeline.

Solution: If the angle valve is closed and the angle valve is opened, if not, check the gas pipeline.

Too much dirt in the shower hot water pipe: If there is too much dirt in the shower, causing too much water pressure, the water vapor linkage device of the water heater will turn off the hot water faucet of the water heater so that the water from the water heater will become brighter, so this water heater pipe, especially this pipe from the kitchen to the bathroom, must be dredged. Workaround:

To clean the gas water heater pipes, you can purchase special dirt cleaning for gas.