How to accept and decorate furniture

First, look at the size.

Furniture should not only be beautiful, but more importantly, functional. Whether the size of the furniture conforms to the principle of ergonomics and whether it meets the specified size determines whether the furniture is convenient to use.

Second, look at the process.

The workmanship of the furniture is not fine, and it can be observed from the combined part to see the rationality and firmness of the connection points between each component of the furniture. If a piece of furniture is combined, its hardware connectors should be of high quality, and the degree of fitting of the hardware itself determines the overall fit of the furniture. For furniture of the overall structure, each connection point, including the connection points between horizontal and vertical, must be tight, without gaps and cannot be loosened.

Drawers and doors should be opened and closed flexibly and returned correctly. The perimeter of the glass door should be polished neatly, open and close flexibly, without collapse and scratches, the four corners should be symmetrical, and the position of the buckle should be correct. The installation of various plug corners, pressure railings, and slideways should be in the correct position, flat and firm, and flexible in opening.

Third, look at the structure.

Check whether the structure of the furniture is reasonable, and whether the frame is correct and firm. Gently push the furniture with your hands, if there is a shaking or creaking sound, it is not a strong structure. It is advisable to check the verticality of the furniture:

When the diagonal length of the plane is greater than 1 meter, the vertical error should be less than.

Millimetre; When it is less than 1 meter, the error should be less than 1 mm. Also check its warpage: when the plane diagonal length is greater than meters, the warpage should be less than 2 mm, and when the diagonal length is less than.

meters, the warpage should be less than mm.

Fourth, look at the appearance.

Because the decoration furniture should be harmonious with the color, texture, pattern, etc. made by other woodworkers, their finishing materials, paint processes, etc. are basically the same. Inspecting the exterior quality of furnishing furniture is similar to inspecting the exterior quality of doors and windows. The main thing is to see whether the surface paint film is smooth and bright, and whether there are quality defects such as falling, bubbles, and wrinkles; It also depends on whether the color difference of the veneer is large, whether the pattern is consistent, whether there are corrosion points, dead joints, breakage, etc.; Whether the edge banding treatment of various wood-based panel parts is tight and straight, whether there is degumming, whether the surface is smooth and flat, and whether there is no bump.