-
Anonymous users2024-01-24More than 10 tons in a month, how much water do you have to run away, you open the toilet tank, open the toilet lid, the leakage will be seen clearly, after 11 o'clock in the evening, the water is in the low peak period, the pressure of the pipe network is high, if the toilet leakage must be able to see clearly. According to what you said, as soon as the angle valve on the toilet is opened, the water meter turns, indicating that there is a problem with the toilet or the connection to the toilet.
-
Anonymous users2024-01-23Toilet leakage, first, the toilet leakage valve is not tightly sealed, resulting in water leakage from the water tank into the toilet; Second, it is possible that the water stop valve of the water tank is installed in a high position, which causes the water tank to be unable to close automatically after it is full, resulting in water from the overflow flow channel toilet. No other circumstances can be determined.
-
Anonymous users2024-01-22The first floor has been said in detail, and there seems to be no other place to save it.
-
Anonymous users2024-01-21Such an invisible toilet leakage problem, you should carefully check several places:
1. Check whether the installation hole of the toilet tank drain valve is deformed or cracked.
2. Check whether the installation surface of the toilet tank drain valve is seriously uneven.
3. Check whether the drain valve of the toilet tank is offset when installed.
4. Check whether the bottom hook screw or compression nut is tightened when the toilet tank drain valve is installed.
5. Check whether the bottom hook screw of the drain valve of the toilet tank is against the bottom of the ceramic hole.
6. Check whether the sealing film of the drain valve of the toilet tank is deformed or loose or there are impurities on the sealing surface.
7. Check that there is a gap between the sealing film of the drainage valve of the toilet tank and the sealing surface.
8. The water level is adjusted too high, and it is higher than the overflow pipe or wrench hole.
9. Whether the drain valve chain is too short.
10. The large hydration accessories have been greatly hydrating.
11. Problems of ceramics themselves, such as cracks in ceramic pipes, etc.
If there is still no problem, you should check to see if there is a leak in other places, such as water pipes, faucets, etc.
You don't have to change the whole thing, the reason for the leakage is that there is a leak in the water tank, and the overall structure of the toilet is very difficult to break So it is whether the water tank has a small valve tightly, that is to say, when you press the flush, the valve will open, and he will close when he does not press it, but after a long time, it will not be closed tightly, generally speaking, it is a small lever One end is a float, who rises up to the float at this end, and the other side falls, and the water outlet is closed, you can take a look. >>>More
This kind of problem must be that the drain valve is draining all the time. There are two possibilities, one is that the water piece is leaking, the leak is very small, or it is leaking along the siphon hole, so you only hear the sound and can't see the running water. There is also a possibility that the water-stopping rubber ring is broken. >>>More
If you can't get it, you have to find a professional! Generally, there is this small advertisement in the corridor.
I took the mirror and put it somewhere else.