-
The national standard is 30CM and 40CM, 45CM should be a rough house, and after the bricks are pasted, it is 40CM, and 40CM is used
-
When buying, tell the merchant the size of the pit spacing. Try to buy as close as possible. It seems that there are only two sizes.
-
There should be no problem with 40 hole spacing.
If the bathroom wall is flat, you can ask the bricklayer master to control the thickness of the tile and ash mouth at 3-4CM, and the ordinary toilet can be installed, but the toilet drain position and the sewer pipe are somewhat misaligned (does not affect the use).
Is the pit spacing so big? In general, the pit spacing is maintained at 28-32, 30 after pasting the bricks.
Nowadays, the toilet pit distance is 300 or 400 mm, and the installation can be adjusted by two centimeters. Your 430 mm, which can leave a gap of one centimeter from the wall in the back, can also be installed, please adopt.
The national standard for toilet drainage is 400 mm, and the tolerance is 0-30mm, that is, the minimum pit distance is allowed to be installed in the toilet bowl with a minimum pit distance of 370mm. >>>More
600 uh (500 is very rare, very little, 600, I haven't seen ah, there are several ways: >>>More