-
Anonymous users2024-01-24Pressing the button is useless without flushing may be two cases.
1. There is a problem with the button and it cannot be started normally, such as stuck.
2. Start the water parts, but there is no water in the water tank to flush.
The tank keeps leaking :
1. There is trachoma at the bottom of the water tank, which keeps leaking into the pipe.
2. The water parts are not completely closed, or the connection pipeline is not closed enough.
All things considered, it may be that the water pieces are not completely closed, it is recommended:
1. Open the lid of the water tank to see if there is water.
2. If there is no water, whether the water parts are stuck. Let's take a look.
3. If the water parts are not stuck, whether the rubber ring between the water parts and the pipeline is aging and the seal is not good.
4. If there is no water in the water tank, and the water flow cannot be judged, put it in the water tank with soot or chalk dust and other similar materials to see where the leakage is.
5. If it doesn't work, find someone to repair it.
-
Anonymous users2024-01-23If you press the button and it doesn't rebound, it's offset, and you can manually adjust it (rotate the button) I don't know which one you are
-
Anonymous users2024-01-22Open the toilet lid to see if the flush switch is broken, or if there is no water, you tell him how to flush the water, and see if the water inlet valve is broken. If you don't get water, you don't open the Sange valve! That's all there is to it. Go ahead and deal with it.
-
Anonymous users2024-01-21Open the toilet tank lid and you'll understand what's going on when you look at the assurance.
-
Anonymous users2024-01-20Either there is no water or the tank contents are broken.
It should be broken, find a professional to fix it or someone who understands it to replace the parts.
If the toilet outlet button is broken, you can go to the decoration store to buy a toilet outlet button to replace it. If you can't replace it, you can find a master in related aspects to repair it. >>>More
The cause of the water spray is the blockage of the sewage pipe. >>>More
Your toilet water part is broken, you need to replace a water part normally, I am in the Chaozhou toilet production base, these problems are very simple.
The flush button of the water tank, remove the root mother on the button thread, put the button into the hole, and then lock the removed root and mother, you can do it, two buttons, generally a large button corresponds to a large amount of water.