-
Anonymous users2024-01-24If the toilet outlet button is broken, you can go to the decoration store to buy a toilet outlet button to replace it. If you can't replace it, you can find a master in related aspects to repair it.
Ways to use the toilet to save water:
There are two dispense buttons on the toilet, one large and one small. The small one is half a bucket of water, and the large one is a full bucket of water. So you don't need to press the small button when you flush too much water.
If you have a toilet at home, you may wish to put some stones, pebbles or empty plastic bottles in the water tank, so that the drainage will be less and you can effectively save water.
-
Anonymous users2024-01-23Method 1: Press the one that comes out of the water and connect the lid inside the toilet tank to see if this is broken, if it is connected. There is no water in the tank, that is, the water stop valve is broken, that is more troublesome, open the toilet to see if the water stop valve is stuck, you can use your hand to dial it to see if it can.
If it still doesn't work, or if you can leave with your hands, then you need to change the water stop valve. The easiest way is to find a maintenance master. Method 2:
Pick up the lid of the water tank and you can see that there is a cable at the lower part of the button, which is the connection between the button and the drain of the toilet tank.
-
Anonymous users2024-01-22Water quality may cause the failure of the water parts, you can take off the water valve, clean it with clean water, and then press it repeatedly, and install it after recovery, but do not move the small scale next to him, otherwise it will affect the function and water volume of the toilet. If you still can't, contact after-sales. Generally, this thing can be guaranteed for three years.
-
Anonymous users2024-01-21Professional maintenance personnel to repair.
-
Anonymous users2024-01-20Is the triangular valve on the toilet open?
-
Anonymous users2024-01-19Water quality may cause the failure of the water parts, you can take off the water valve, clean it with clean water, and then press the front Wang repeatedly, and install it after recovery, but do not move the small scale next to him, otherwise it will affect the function of the toilet and the amount of water. If you still can't, contact the sales tour after it. Generally, this thing can be guaranteed for three years.
It should be broken, find a professional to fix it or someone who understands it to replace the parts.
The cause of the water spray is the blockage of the sewage pipe. >>>More
It is possible that something that has just been washed down is not flushed and gets stuck in the sewer, causing the sewer to be blocked and the water not to flow out.
Your toilet water part is broken, you need to replace a water part normally, I am in the Chaozhou toilet production base, these problems are very simple.
The flush button of the water tank, remove the root mother on the button thread, put the button into the hole, and then lock the removed root and mother, you can do it, two buttons, generally a large button corresponds to a large amount of water.