-
Anonymous users2024-01-24The drop plate is a waterproof requirement, if you transform yourself, pay attention to find a good flooding, there is a bath room when showering, and it is good not to get water all over the ground. Ensure that all floor water flows to the floor drain and does not flow to the outside (bathroom).
The red part counts the full area, two algorithms.
The balcony in the main structure should be calculated according to the outer area of the structure (if you want to apply, the white part above should also be counted as 1 2 area, so it is better to calculate the whole area, note that the new code says the height of the structure, not the net height). >>>More
You can pass or not, it mainly depends on what kind of requirements you have for the bathroom, and women have high requirements for the bathroom.
If there is no falling plate, it will be made to drain the same layer without falling plate. Toilet drainage is roughly divided into heterogeneous drainage and same-layer drainage. At present, the drainage of the same layer is divided into the drainage of the same layer, the micro falling plate, and the non-descending plate. >>>More
The bathroom slab is generally lowered by about 100, and the surrounding beam height is generally greater than 200, so that even if your floor slab is 100 thick, the slab is still within the support of the beam, that is, the support of the beam or the slab. As for the negative reinforcement, of course, it cannot be penetrated with the adjacent slabs, because the elevation is different and cannot be penetrated, so the negative reinforcement can be considered to extend into the beam.
This should be based on the specific situation of your bathroom, and only after the designer can measure it to come up with a reasonable plan--- Shenyang IKEA decoration. >>>More