-
Anonymous users2024-01-24If the mobile phone is flooded, you need to perform the following operations:1Disassemble the whole machine and prepare it for use with the appropriate screwdriver.
2.When removing the screen, gently separate the chiplet that connects the screen to the motherboard from the motherboard. 3.
Before removing the metal shielding isolation layer, be sure to tear off the network access card and the card slot sticker under the network access card. 4.Take a hair dryer and blow dry, not in front of the screen for a long time, such high temperatures will destroy the screen5
Blow the front and back of the motherboard to ensure that there is no moisture left, and try to blow out the water at the earpiece. 6.Put the disassembled phone in a noisy place, preferably for about two days, and then install it.
It feels like the limiter didn't fall, and it got stuck on the side of the toilet.
What you mean is that your water tank does not flush, but if it is not flushed, the water in the tank should always be full, the water tank will not enter the water when it is full, and you will not see the water spraying phenomenon, and there will be a small flow of water to the toilet, if you can send a photo after opening the top cover, it will be easy to analyze.
The float in the tank drives the water inlet valve of the water tank, when the float floats up and the valve is not closed, and the water continues to enter, it must be a problem with the valve, so you have to check the valve, whether the link between the float and the valve is loose, or the valve is broken, and then it is easy to deal with. >>>More
Close the water valve and remove the water inlet to clean up.
If it is an old-fashioned float tank fitting, it may be that the height of the float is not adjusted properly, or the valve for water inlet is open. If it is a new tank fitting without a float, it may be that the water inlet part is too tight or fails. Actually, it's a very simple thing, but the text is not very clear. >>>More