-
If the mobile phone is flooded, you need to perform the following operations:1Disassemble the whole machine and prepare it for use with the appropriate screwdriver.
2.When removing the screen, gently separate the chiplet that connects the screen to the motherboard from the motherboard. 3.
Before removing the metal shielding isolation layer, the network access card and the card slot sticker under the network access card must be torn off. 4.Take a hair dryer and blow dry, you can't blow on the screen for a long time, such a high temperature will damage the screen 5
Blow the front and back of the motherboard to ensure that there is no moisture left, and try to blow out the water at the earpiece. 6.Put the disassembled phone in a noisy place, preferably for about two days, and then install it.
It depends on what the fixing method of aluminum alloy is, if it is fixed with stainless steel connectors, the electrochemical corrosion of the aluminum alloy structure is smaller. If corrosion is observed in aluminum alloy structural parts, the strength of aluminum alloy structural parts will be weakened over time, and there may be potential safety hazards.
This mainly depends on whether the aluminum alloy doors and windows are meticulous and the sealing is good. >>>More
If you're not afraid of trouble. It can be thoroughly cleaned once and then painted. But it's also more troublesome. >>>More
First of all, the glass cannot be 3MM, at least 4MM Zhenyan. >>>More
This can be customized by the master, but now few people use aluminum alloy to close the balcony. >>>More