Why should custom furniture be edged on the board

The edge banding of modern panel furniture is widely used in straight edge banding, special-shaped edge banding (soft-formed edge banding) and post-forming edge banding. The most common of these is straight edge banding. >>>More

The main component of PVC edge banding strip is polyvinyl chloride, which is made by mixing, calendering, vacuum blister and other processes. Thicknesses from up to 3 mm and widths from 9 mm to 100 mm. The product has the following main features: >>>More

Depending on the material, there are solid wood edge banding strips and PVC edge banding strips, if the solid wood edge banding strips are not painted, they may grow mold or be polluted by dust. PVC, on the other hand, has been used for too long, and if the environment is harsh, it is normal for it to turn black.

You can also buy edge banding strip seals, 2 yuan a piece.

The edge banding of high-quality plates is delicate and smooth to the touch, the sealing line is straight, and the joints are fine. Because this is a linear edge banding machine to complete multiple processes such as edge banding, broken end, trimming, chamfering, polishing, etc., it can ensure the most accurate size. And some workshop-type small factories do not use machine high-temperature pressure edge banding, the use of manual edge banding, is to use a brush glue, manual pressing edge banding, with a caster paper knife to trim, with manual polishing machine polishing, such a plate edge banding due to uneven gluing, it looks like the edge banding is uneven, the sealing line undulating, and even the edge banding falls off, although it can be sealed at that time and can also be seen, but because it is not evenly forced, the edge will be loosened after a long time. >>>More