-
Anonymous users2024-01-24Looking for the sanitary ware to disassemble and clean up and reinstall, it is very convenient, and they are more professional.
-
Anonymous users2024-01-23Tear it down, get it through and put it back on.
The easiest way is to add the appropriate amount of water to the toilet bowl and press the leather bowl at the toilet mouth with the help of a certain force of water. You can also buy some caustic soda to boil water, melt the caustic soda and pour it into the toilet, after chemical reaction, the dirt in the toilet bowl will be corroded, wait for ten minutes and then rinse it with clean water. You can also use a good quality plastic water pipe, connect the tap water at one end and plug it into the toilet mouth at the other end, and then block the toilet mouth with something like rags, and then turn on the tap water, which will use the water pressure to dredge the pipe.
Small pieces can be washed away directly, large ones need to be taken out, and you can ask the housekeeping service to unclog the pipes.
You can go outside to buy a plastic flush bucket, 60 yuan, flush in two gears, and then borrow a tube, it will be more unsightly, there is no way, you can only do this without changing the toilet.
Find a NdFeB magnet and tie it to a rope and send it in, suck it out, now the magnet is easy to find, and there is it in the waste hard drive. I have, I can't give it to you.
There is a combination kit where you buy a toilet, and the general one is more than ten yuan, for reference.