What is the scale on the toilet core for?,Is it useful?

The toilet at home has been used for a long time, and I feel that it can't be flushed clean, and the momentum is not as strong as when I first bought it. My family has recently encountered this kind of incident, the water output of the toilet at home is getting smaller and smaller, every time I go to the toilet, the momentum is so small that I have to flush twice, or I use the basin to flush the water, which is particularly troublesome!

I also asked the master to take a look, but he did it in a few minutes, I saw the master open the toilet tank, and tinkered with the drain valve of the toilet a few times, and the amount of water immediately became larger, and the toilet was not blocked. The master told me that there are two small mechanisms on the drain valve of the toilet, which are the two scales on the top, which are used to adjust the amount of water.

Generally, one of the two scales is blue, one is red, usually less up and more down, these two scales correspond to the two buttons on the toilet, which are full drainage (red) and semi-drainage (blue), if you want these two types of water output to reach the maximum, you only need to adjust the two buttons on the drain valve to the bottom.

How to adjust the two scales on the drain valve optimally?

The master suggested that the red button under the full drain should be adjusted to the bottom, and the water output is large and fierce, because the full drain is generally used when flushing the stool, so the larger the water volume, the better. However, semi-draining is used when flushing urine, and it does not require such a large amount of water output, so it is most suitable to adjust to the middle position, and if it is too low, it will be too wasteful of water.

Is it better to flush as little as possible?

Usually, the default state of the toilet is the largest, and the owner can adjust it up and down by himself in the later stage, and then flush the test to find the water volume position that he is satisfied with. In order to save water, some owners adjust the scale of the drain valve to the top, in fact, this practice is wrong, each time the water consumption becomes smaller, but it needs to be flushed several times to clean, so not only can not save water but will be very water-consuming.

In addition, if the water output of the toilet at home becomes smaller, you can also adjust the water discharge connecting rod of the toilet, that is, the two long buttons behind the toilet tank cover, they are also the organs that control the amount of toilet drainage.

It is very common for the toilet to become smaller after a long time, and it can be easily solved by adjusting the scale in the future. In fact, there are many things at home that will have a little problem after a long time, as long as you master some simple tricks, it can be said that it is both practical and money-saving!

That scale is used to adjust the height of the stop flush level, and usually adjusting it does not feel much water saving.

If your toilet is leaking, just check whether the rubber is aged, damaged, and impurities are stuck and inflexible. (I guess you've already removed it), wash it with clean water and check it carefully, maybe you can find the reason.

If it really doesn't work, then take the sample to the hardware store and buy a new one'

You are wrong, there is a scale to indicate that the water outlet is 6 liters of water, and the water output of the water outlet group is adjusted.

There are many reasons for water leakage, and you can find the after-sales service of this brand to deal with.

Try filling him up with water and let him get to 9.

It is used to adjust the water level height in the water tank.