My bath bomb is decorated for An, it seems to be a panda brand I haven t heard of two toilets.

Updated on Toilets 2024-09-15
2 answers
  1. Anonymous users2024-01-24

    If it is the bath bomb that works normally after the switch, then at least it can be proven that this wiring is correct.

    If it's Mars, then it depends on what kind of Mars it is. Under normal circumstances, due to the relatively large power of the bath bomb, there will always be more or less sparks at the moment of contact with its contacts.

    At night, the spark is more obvious, this is normal, if the spark is larger, you can hear the sound of stabbing, it is because the line of the bath bomb is not tightened, you remove the panel, use a screwdriver to tighten all the wires.

    Or the contact quality of this bath bomb switch is not very good, or the contact contact of the switch is not reliable.

    However, if the contact of the switch is not reliable, then the sound of stabbing will be heard during use, and if there is no stabbing and ignition phenomenon during use, it is certain that the wiring of the binding post is loose.

    If you will hear a squeak during use after tightening the wire end wiring, it means that there is a quality problem with the switch itself and you can ask for a return.

  2. Anonymous users2024-01-23

    Hurry up and change it, it's dangerous.

Related questions
4 answers2024-09-15

The trap is an S-shaped bend in the toilet drain pipe, which plays the role of storing water and insulating odors, and if there are dirty things such as hair, grease, cloth, etc., stuck here, it will lead to blockage. You can find a skilled master who can dredge the pipes to deal with it thoroughly, and take out the blockages inside, and you're good to go. Don't throw anything into the toilet, especially sanitary napkins and hair, which will be much less clogged.

1 answers2024-09-15

It's a bit difficult, but I've seen a movie with a similar plot called "My Sassy Female Teacher". >>>More

3 answers2024-09-15

If the size is the same, then you can use it, let the master of the bath bomb install a sling wire on the top of the bath bomb you want to install, and tie it firmly with two wires or wires through the top of the bath bomb. It's a little troublesome to assemble, but that's how my house is installed, it's very sturdy, and I've been using it.

3 answers2024-09-15

Open the main switch, then uninstall the switch of the bath bomb, unscrew the various wires, wrap it, and then turn on the main power supply.