How do you install a storm outside the bathroom?

Updated on Bathroom 2024-09-15
2 answers
  1. Anonymous users2024-01-24

    You have to ask a professional master to install this, don't install it yourself.

  2. Anonymous users2024-01-23

    1. The wall-mounted exhaust fan is small in size and can be embedded above the wall, but due to the narrow cross-section of its exhaust outlet, the ventilation strength is weak, so it is only suitable for installation in the bathroom with a small area.

    2. The ceiling exhaust fan has a good appearance and can be installed on the ceiling of the bathroom. The ventilation fan has a short duct, so it is necessary to purchase a ventilation duct to match the duct when installing.

    3. The window exhaust fan is different from the first two, it has a single and double two-way operation, which can not only discharge the indoor air, but also supplement the outdoor fresh air to the room, therefore, the window exhaust fan has a larger scope of application and better effect.

Related questions
The skin of the wall outside the bathroom is peeling off
2 answers2024-09-15

You are due to the bathroom wall waterproofing is not done, infiltrated in the past, first find someone to scrape off the wall skin can be scraped off, scrape white, and then take care of the bathroom, simple point can be used waterproof glue to repair the tile, to be stable to knock off the tile to make waterproof polypropylene, and then tiled.

What to do if the wall outside the bathroom is peeling
10 answers2024-09-15

It is necessary to shovel off the original wall of the bathroom, then brush the waterproof paint, and then re-pave the tiles, so as to prevent the wall from peeling again. >>>More

Where does the water seepage come from in the corner of the outside of the bathroom or at the door o
4 answers2024-09-15

Many people think that the waterproof layer will only leak downstairs if there is a problem, but in fact it is not the case, the waterproof layer is divided into a horizontal waterproof layer and a vertical waterproof layer on the side, the horizontal waterproof layer will leak to the downstairs if there is a problem, and the vertical waterproof layer on the side will leak to their own home if there is a problem. Water leaking into the corner of the outside of your bathroom or the door of the bathroom is first sure that the vertical waterproof layer on the side is broken somewhere, otherwise no matter how much water can only come up from the tile surface. In fact, the damp marks we see in the corner of the bathroom or the door of the bathroom are not vertically leaked in the past, theoretically speaking, as long as the waterproof layer is damaged somewhere, the open water in the bathroom penetrates below the tile surface from the corner, tile surface and joints or any other possible place, and is concentrated in the mortar layer, then the mortar layer is equivalent to becoming a water layer, and then concentrated in the waterproof layer where the damage leaks downstairs.

How to connect the bull switch, it is the switch outside the bathroom, a total of four wires, one re
3 answers2024-09-15

The one you bought is two dual-control switches.

Dual control switch means: two switches can be installed in different places, and control one lamp at the same time. >>>More

How to pack the exposed sewer pipe in the bathroom?
1 answers2024-09-15

Normally, the plastering master is asked to build it with bricks, and then paste the tiles, so that it is beautiful and soundproof. If your tiles are pasted, it doesn't matter, you buy sewer decoration materials online, such as fake trees, fake bamboo, so packaging, which is both beautiful and can add green to the home and prevent visual fatigue.