-
Anonymous users2024-01-24The ground has not been leveled.
Uneven ground causes part of the floor and keel to hang in the air, making a noise when stepping on it.
The wooden keel is not treated with moisture.
At present, the construction usually uses a non-dry keel made of pine planks sawn, which is fixed on the ground about 30 days in advance, and there is no moisture-proof layer between the ground and the keel. When it comes to paving the floor, it is laid directly without checking the moisture content of the keel. In fact, at this time, the moisture content of the keel is usually about 25%, and the moisture content of the qualified wooden floor is generally about 12%.
The wooden keel is fastened with iron nails.
In the construction, the fixing method of beating the wooden wedge and adding the iron nail will cause the nail holding force to be insufficient because the contact surface between the wooden wedge and the iron nail is too small, and it is easy to cause the wooden keel to loosen, and there will be a sound when stepping on the floor.
The assembly is too loose or too tight.
The expansion and contraction of wood flooring changes with the change of ambient temperature and humidity. Therefore, when formulating the wood floor paving plan, the assembly tightness of the wood floor should be reasonably arranged according to the ambient temperature and humidity of the place where it is used. If it is too loose, the floor will shrink and there will be large gaps, and if it is too tight, the floor will arch when it expands.
Cross-construction of renovation works.
During construction, the wooden floor is laid first, and then other construction projects are carried out on the surface of the floor, which is the common practice of the decoration team at present. As a result, it often takes a month or more to polish and paint the floor after it has been paved. During this period, the floor does not have any isolation measures from the moisture and chemicals of the surrounding environment, which is likely to cause the wooden floor to deform and crack due to the rapid change in moisture content.
(1) After all solid wood floors are transported to the construction and installation site, they should be unpacked and stored indoors for more than a week, so that the solid wood floors can be used only after they are suitable for the temperature and humidity of the room. >>>More
First, pay attention to the ambient temperature.
Now many families will lay solid wood flooring, because after the solid wood floor is laid, the grade of the home environment will also be improved, we will live more comfortably, and we will need to pay attention to some related matters when laying solid wood flooring, of course, hand it over to professionals to solve, and we don't have to worry about these, but if you do it yourself, you must avoid several links, the first most important is the environmental temperature problem, you must choose the right environment and time to lay, in general, After two o'clock in the afternoon, the temperature is more suitable between 16 and 30 degrees. >>>More
Precautions for paving solid wood flooring are as follows: >>>More
1.Keep the floor dry and clean, and avoid mopping the floor with a wet mop or scrubbing with alkaline water or soapy water, so as not to damage the brightness of the paint and damage the paint film. Clean the floor with a dry mop or wringed out wet mop, and use floor wax or floor maintenance oil every one to two months. >>>More
1 all.
1. Keep the indoor humidity and humidity constant. >>>More