What should be paid attention to when paving solid wood flooring?

(1) After all solid wood floors are transported to the construction and installation site, they should be unpacked and stored indoors for more than a week, so that the solid wood floors can be used only after they are suitable for the temperature and humidity of the room.

2) Before the installation of solid wood flooring, the selection should be carried out to eliminate the unqualified products with obvious quality defects. The color pattern is consistent in the same room, there is a slight quality deficiency but does not affect the use, can be placed in the bed, cabinet and other furniture at the bottom of the use, the same room must be the same plate thickness. When purchasing, it should be purchased at one time according to the loss of the actual pavement area increased by 10%.

3) Paving solid wood flooring should avoid construction under heavy rain, rainy and other climatic conditions. It is best to keep the indoor temperature and humidity stable in the interior decoration of the floor.

4) The installation of solid wood flooring in the same room should be paved at one time, so sufficient auxiliary materials should be prepared, and the finished product should be protected in time to prevent oil collapse, juice and other pollution surfaces. The glue extruded during installation should be wiped off in time.

5) Generally speaking, the direction of laying the floor should be parallel to the direction of most of the light outside the window, or parallel to the longer wall of the room to obtain a better visual effect. Before laying or encountering irregular room types, the installer should explain the effect of various laying directions to the user, and should solicit the user's opinions, and indicate it on the installation work sheet.

6) Solid wood floor installation can also choose the appropriate nail nailing method! When the floor is installed, a layer of plastic foam is laid underneath, and the floor is directly laid on top! There will be no thumping sound when such a floor is gone!

Precautions for solid wood floor paving.

Whether the ground is level.

Although there are many ways to install hardwood flooring, no matter which method you use, you should pay attention to whether the ground is flat or not. Because the solid wood floor is made of wood, if the floor is uneven, after laying the floor, it will make a squeaking sound when you step on it, and it will also wear out the floor material. It is particularly important to level the floor before laying a wooden floor.

Accessories keel dry or not.

The installation of solid wood flooring is inseparable from the use of keel, do not think that buying a high-quality solid wood floor will bring convenience to future life, if the accessories keel is purchased is not dried wood material, they will also increase the inherent moisture of the solid wood floor, resulting in the protrusion of the floor surface, the cracking of the paint layer. The water content of the undried keel is 25%, while the quality keel contains only 12% water. It can be seen that the importance of keel drying, since you have spent a lot of money to buy solid wood flooring, it is not bad for the keel money, you must choose the keel that meets the quality standards after drying.

Generally, their specifications are 3*2 or 4*. According to the size and specification of the solid wood flooring you choose, you can choose the keel.

Moderate tightness is best.

Usually, the solid wood flooring bought back is packaged in containers, and generally speaking, there will be no moisture, but if consumers are very uneasy, they can also put the solid wood floor in the room and let it stand for two days before laying it. When installing solid wood flooring, you need to pay attention not to splicing the solid wood floor relatively densely, the solid wood floor will be deformed when squeezed, due to the presence of water molecules in the air, the humidity in the air is too large, and it will expand after being absorbed into the moisture by the floor, and the installation is too dense, there is no gap between the floor and the floor, and the floor will arch up on the surface after expansion. And if it is too loose, the floor has a feeling of shaking.

Dirt will enter between the gaps and do not use cleaning, maintenance.

When paving the floor, use an electric drill to hit the eyelet at the tongue of the floor, that is, the convex groove, the diameter of the eyelet should be slightly smaller than the diameter of the floor nail, generally four eyelets should be played on the floor 910 mm long, and the floor nail is fixed on the wooden keel with screwing in from the eyelet. In order to ensure the beauty of the floor pavement, it should be connected by staggered joints (the staggered seams are the most beautiful and firm when they are more than 30 cm). The length of the floor nail should be times the thickness of the floor, and it should be fixed by driving it into the wooden keel at an angle of 30 ° to 50 ° from the eye.

If the paving of the solid wood floor needs to be made of plywood as a cushion, the plywood should be sawn into small pieces with a size of millimeters or millimeters, and then the small wooden blocks of these plywood are fixed on the wooden keel with wooden keel nails, and after all the plywood cushions are laid, the level should be checked again according to the standard of 3 mm per 2 meters of height difference.