-
Anonymous users2024-01-24It is better to walk on the ground and on the wall, and it is better to go to the top corner line and baseboard, which is convenient for maintenance and replacement in the future. Another home decoration construction specification for you: Electrical Engineering Wiring The laying of wires should meet the design requirements, and piping (metal piping or plastic pipes), sheathed wires and other laying lines can be used.
Ordinary insulated wires shall not be laid bare.
-
Anonymous users2024-01-23Yes, the line pipe should be protected, and the ground should be waterproof.
1. After the installation of the water pipe, the pressurization test must be carried out: the pressurization test is generally carried out under the condition of double water pressure, and there should be no water leakage in the test. >>>More
Bathroom floor heating refers to the back basket (radiator), which is located above the back of the toilet.
Suspended ceiling: plastic steel ceiling or aluminum ceiling; bath bombs; ceiling lights; Exhaust fan (preferably directly above the toilet). >>>More
Yes, if the bathroom is installed with floor heating, the comfort will be higher, because the floor heating is transmitted from the bottom up in the form of radiation from the ground to the ground, so the soles of the feet will not be cold in the first place, and it can also completely solve the dampness and odor of the bathroom; On the other hand, the area of the bathroom is generally not large, so the floor heating is better, but the bathroom is only limited to floor heating in the dry area, and it is not recommended to do it in the wet area. >>>More
Kitchen and bathroom electrical bai
The line installation is different from other rooms, because this is a more humid place version, so the line pipe of the switch right socket must be led down from the beam and should not be laid horizontally, the socket installation height is in, all switch sockets are splash-proof safety type, the grounding wire must be connected in parallel and must not be connected in series, the height of the wall tile should be reserved when installing the wire box, and all metal items in the bathroom. For example, all kinds of metal brackets, metal floor drains, etc. must be connected to the equipotential, the equipotential connection pipe can go to the ground or wall, the exhaust fan socket should be close to the air duct, the height of the socket is 2m, and the air switch between the kitchen and bathroom must be with leakage protection. Considering that the electricity consumption of the kitchen and bathroom is relatively large, it is best to set up separate circuits in the kitchen and bathroom, if the kitchen and bathroom ceiling, the wires laid in the ceiling must be threaded through the pipe and led vertically at the socket. >>>More