Ask for help What may be the reason for the large area of hollowing in the bathroom wall tiles

Updated on Bathroom 2024-09-10
2 answers
  1. Anonymous users2024-01-24

    1. The treatment of the wall base is not very smooth, which will lead to the occurrence of hollowing, the reason: the tensile force of the tile of the uneven wall base is not the same, so that the high part will pull up the low part after a long time.

    2. When pasting tiles, the construction master's tile pressing will also lead to hollowing, the reason: the unreal pressure will leave air in it, and the putty of the base layer will dry for a long time, and the air in the air will still exist and will bulge.

  2. Anonymous users2024-01-23

    The hollow wall tiles in the bathroom are caused by the quality of the bricks themselves, and the second is caused by the poor craftsmanship of the tilers.

Related questions
Is the large area of hollowing of bathroom wall tiles related to tile adhesive?
2 answers2024-09-10

The ceramic tile has a large area of hollowing, and the technicians of Gulai Building Materials summarized the following reasons: >>>More

What should I do if the wall tiles in the bathroom are hollowing out and falling off?
2 answers2024-09-10

It's time to knock it off and re-pave it.

It is best to choose the re-paving material by yourself, choose a good material, if it is contracted to an outside master, you may cut corners on the material. Paving should also be supervised. This kind of thing should be taken seriously. >>>More

The bathroom wall tiles are hollow in a large area, and which technical department is to find to do
2 answers2024-09-10

Abstract Wet paving is easy to cause hollowing, because the mortar contains high moisture, and when drying, it is easy to form cavities, resulting in the floor tiles can not be fully bonded with the base layer, resulting in the phenomenon of hollowing. >>>More

Ask for help in the problem of large-scale hollowing of wall tiles in the bathroom
3 answers2024-09-10

1. The treatment of the wall base is not very smooth, which will lead to the occurrence of hollowing, the reason: the tensile force of the tile of the uneven base of the wall is not the same, so that the high part will pull up the ground department after a long time; 2. When pasting tiles, the construction master's tile pressing will also lead to hollowing, the reason: the unreal pressure will leave air in it, and the putty of the base layer will dry for a long time, and the air in the air will still exist and will bulge.

For help in the problem of large-scale hollowing of bathroom wall tiles, there has been a waterproof
8 answers2024-09-10

The wall of the new house itself is not too stable, and organic binders are used, and it is estimated that the waterproof material is also a little problematic, and the expansion rate is different. It is recommended to redo the bricks with mortar!