The light in the bathroom is flashing badly, how to fix it if you change it to a new light or flash?

There are many reasons for the light to flicker, and it depends on what type of lamp is used.

The incandescent lamp flickers, generally because a certain joint is loose, such as a switch joint, lamp head wiring, etc.;

Fluorescent lamps and energy-saving lamps flicker, generally caused by the following reasons:

1. The wiring of the switch is irregular, and the live wire should be controlled, and the switch is connected to the control zero line;

2. Rectifier or starter failure, such as loose internal wiring of rectifier, merging starter plugs, capacitor breakdown, etc., can replace the components by replacement method;

3. The lamp or tube is aging, the filament and hook are loose, the filament can not be discharged normally, and the life will be at the end, so you can replace it;

4. The voltage is low, the voltage drop is too large, and it can be solved by increasing the voltage;

5. If it is a type lamp, it is a normal phenomenon, and it can be used a few times to eliminate it.

If the other appliances in the home are working properly, it can be ruled out that there is a circuit problem. If the second lamp is new, it should not be a problem with the lamp. Only the base of the lamp and the problem of the jump light remain, first try to change the jump light, if it doesn't work, you have to repair or change the base of the light.

The entire light strip base has been replaced, either because of the lamp, or because the lamp holder should be loose and not in good contact. The base must be replaced, otherwise the new lamp will flash and break.

Is it okay to change the entire light strip base? Who knows if you don't see it live.

The entire light strip base has been replaced, either because of the lamp sedan tube, or because the lamp holder should be loose, and the contact is not good. The base of the closed cavity must be replaced, otherwise the new lamp will flash and break.