-
Anonymous users2024-01-24It's just that the infill wall of the frame structure is not built to the top at one time during construction, and a part of the upper part is left; After waiting for 14 days for the settlement of the infill wall to be stabilized, the junction between the frame beam and the brick wall is squeezed tightly by the method of oblique masonry of side bricks.
In PKPM, the sanitary partition wall is infilled according to the wall, and the self-weight of the partition wall is added to the beam according to the dead load on the beam line!
From a design point of view, the infill wall is not a main structure, it is an envelope structure. But its quality problems, especially the exterior walls, are generally caused by the quality of the main structure, in this case within the service life of the building (the general design is 50 years), it should be warranted.
It's not realistic to switch between the kitchen and bathroom. You can't change the sewer pipe in the bathroom, which means that the kitchen can't install the sewer pipe, and there is no condition to install the toilet at all. No matter what the structure, as long as you have upstairs or downstairs, you can't change it. >>>More
If it is determined that it is a frame structure, the walls are all infill walls, and the safety of the main structure will not be affected when knocked down. >>>More
The inner layer is cemented gypsum board, and then tiled to treat it, and the wall should also be waterproof.