-
Anonymous users2024-01-23If it is determined that it is a frame structure, the walls are all infill walls, and the safety of the main structure will not be affected when knocked down.
It's just that nowadays, it seems that pure frame houses are rare, and the frame shear structure is generally used in high-rise buildings. The shear wall of the frame shear is a stressed member and cannot be moved.
-
Anonymous users2024-01-22This is one of the advantages of the frame structure, and the space separation is relatively free.
-
Anonymous users2024-01-21You said that it is a frame structure of the house, which means that you also understand the structure, and the inner wall of the bathroom is built afterwards, so it is not much of a problem to knock it off, but you have to consider whether the weight of the upstairs wall can stand it?
upstairs plumbing treatment and other issues.
-
Anonymous users2024-01-20It should work. Ask the decoration master specifically, and ask a few more.
From a design point of view, the infill wall is not a main structure, it is an envelope structure. But its quality problems, especially the exterior walls, are generally caused by the quality of the main structure, in this case within the service life of the building (the general design is 50 years), it should be warranted.
It's just one thing you can't change: the main sewer pipe is the main pipe of the bathroom, and the floor drain, sewer nozzle, etc. may have a serious bad smell - it is not recommended that you change it like this!
Rural houses are not frame structures, they are brickwork. A hollow living room with a height of 6 meters is safe. However, it is necessary to ensure that the strength grade of the masonry is not less than and the strength of the mortar is not less than. Structural columns are set at corners and ends, and ring beams are set up on each floor.
The column "Main" is "guest stop" to the living room
It doesn't matter, give him a "curtain to listen to politics", "I have the final say!" ” >>>More
OK. However, it is not recommended that you use brick masonry for the wall, after all, the load is too heavy, you can use a lightweight partition wall to reduce the load, after all, the house is too long. The second is to consider the water supply and drainage of the pipeline, as far as I know, many old house pipes are too different from the pipeline materials used now, and the interface docking is difficult. >>>More