-
Anonymous users2024-01-24It is also possible to use silicone, it is best to use an instantaneous plugging agent, first cut the floor tile joints larger, and then batch it with a batch knife after the instantaneous plugging agent. If there is a problem with the pipeline, it still won't solve the problem.
-
Anonymous users2024-01-23This is not good! If you can make the water drain faster, you can use it directly to treat the seam and apply it on the whole side!
-
Anonymous users2024-01-22What do you brush on the floor? Find a small shovel, buckle out the floor tile joints one by one, and use silicone or other waterproof materials to fill the joints, which is a lazy way to save money.
The best way is to pick up the floor tiles, redo the waterproofing, and then pave the floor tiles, which is a century-old project.
1. Since the waterproofing agent no longer absorbs water after drying, it is necessary to repeat the brushing (spraying) 2 or 3 times continuously, without a gap in the middle, the deeper the penetration, the better the waterproof effect; >>>More
Silicone penetrants are a good water repellent agent. But the general waterproof material has an effect, mainly depends on how you use it and where you use it. >>>More
The waterproof material is the envelope of the building to prevent the penetration of rainwater, snow water and groundwater; It is necessary to prevent the erosion of moisture, vapor and other harmful gases and liquids in the air; The separating structure should prevent the seepage of water supply and drainage. These materials are collectively referred to as those that are resistant to impermeation, leakage, and erosion.
Most of the waterproofing in the bathroom uses silicone sealant, such as the toilet sink and other gaps, if it is a leak caused by serious wall cracking, it needs to be rebuilt to repair.
OK.
In a long-term water or moisture-proof environment, plastic flooring can also be laid, but do not use ordinary plastic flooring, it is recommended to use a good quality composite membrane, if the surface should have a concave and convex non-slip texture is better. >>>More