How to adjust the buoy of the toilet

Step 1 First of all, we lift the lid of the toilet, pay attention to be sure to hold it firmly, handle it gently, and do not bump it. >>>More

Open the upper lid of the toilet, there are two buttons on the lid of the water tank, one is a small amount of water, the other is a large amount of water, the water tank of the toilet is generally a general rule is less up and down more, if you want the water output of full drainage and semi-drainage is the largest, just adjust the two buttons to the bottom, and the full drainage should be adjusted to the bottom, because the full drainage is generally used to flush the stool, and the larger the amount of water, the better. Semi-draining is used for urinating, and generally does not need to use a large amount of water, so it is appropriate to adjust it to the middle position.

The water-saving valve of the toilet does not play a big role in the water transfer part. Just adjust the water level directly.

First of all, we must know that the adjustment of the total water inlet of the water tank is the height of the float on the left inlet valve. Then you should ask the question of the displacement of the drain valve, first of all, you must recognize the role of the two movable adjustment joints on the drain valve, as shown in the following figure >>>More

Open the upper lid of the toilet, there are two buttons on the lid of the water tank, one is a small amount of water, the other is a large amount of water, the water tank of the toilet is generally a general rule is less up and down more, if you want the water output of full drainage and semi-drainage is the largest, just adjust the two buttons to the bottom, and the full drainage should be adjusted to the bottom, because the full drainage is generally used to flush the stool, and the larger the amount of water, the better. Semi-draining is used for urinating, and generally does not need to use a large amount of water, so it is appropriate to adjust it to the middle position.