How to adjust the water level of the toilet tank?

Open the upper lid of the toilet, there are two buttons on the lid of the water tank, one is a small amount of water, the other is a large amount of water, the water tank of the toilet is generally a general rule is less up and down more, if you want the water output of full drainage and semi-drainage is the largest, just adjust the two buttons to the bottom, and the full drainage should be adjusted to the bottom, because the full drainage is generally used to flush the stool, and the larger the amount of water, the better. Semi-draining is used for urinating, and generally does not need to use a large amount of water, so it is appropriate to adjust it to the middle position.

1. Open the lid on the water tank first, and you will see that there are two openings, one is for water inlet and the other is for water out. 2. Remove the water inlet and find the regulating valve that adjusts the water level inside. 3. Rotate the gear clockwise, you can raise the water level, but the design of each brand is different, some are dialed up and down, if it is this kind of flush toilet, if you want to increase the flushing strength, you have to dial down, and lowering the water level is to dial up.

4. There is also a white cylinder in the water tank of some flush toilets, there will be different units on the cylinder, and the two blue gears can be adjusted to the size of the gear, and the upward adjustment is to raise the water level.

First of all, open the lid of the toilet, we can see the ball connecting rod mechanism inside, which has a screw, there are screws on it, it is easy to recognize, the screw is adjusted up is to lower the water level of the water storage, and the lower level is to increase the water level of the water tank storage, in order to save water, we can adjust it upward, and there is a way to save trouble, put a beer bottle full of water inside, which is also equivalent to reducing the water storage.

> let's talk about adjusting the water volume of the inlet valve, remove the toilet lid and remove the inlet valve parts, and turn the card of the inlet valve in the direction of "OPEN". Then pull the inlet valve body to make the inlet valve as a whole raise or lower. The lock and loosening of the card can be found in the logo of the water inlet pipe.

The > adjustment lever can also realize the fine adjustment of the inlet valve, which can raise or lower the water level of the water tank. When the adjustment lever is rotated counterclockwise, the float box descends and the tank water level decreases. On the contrary, by rotating the adjustment lever clockwise, the floating box rises, and the water level of the tank rises.

> next is the adjustment of the drain valve, first rotate the valve body counterclockwise to take out the drain valve, and then tighten the positioning buckle of the valve body on the positioning hole of the drain head according to the diagram, and then rotate the valve body clockwise to install it.

If you put an appropriate amount of empty water bottles, you can reduce the water level of the tank by tying them to a fixed place.

Fine-tuning of the water level of the water inlet valve tank: The adjustment lever can make the water level of the water tank rise or fall. When the adjustment lever is rotated counterclockwise, the float box descends and the tank water level decreases. On the contrary, by rotating the adjustment lever clockwise, the floating box rises, and the water level of the tank rises.

Adjustment of the drain valve (large drain adjustment) As shown in the figure, the adjustment section switch can make the drain valve drain large. When the regulator switch moves down to seal the hole, the displacement is larger. Conversely, moving upwards opens the hole and distributes less water.

> precautions: The water tank installed in the squatting toilet, the installation height of the water tank is one meter away from the water circle of the toilet, and the water pressure requirements are appropriate, so as to effectively achieve a good flushing effect. When installing the whole piece of the new water tank, pay attention to whether the position of the new water tank hanging is comparable to the old one.

If not, move the wall pendant. After hanging up the new water tank, connect the upper and lower flush pipes and the high-pressure inlet hose.

From the perspective of sanitary squatting toilets, the main bathroom uses a toilet, the guest toilet uses a squatting toilet, and the larger bathroom family can also choose a men's urinal, which is not only conducive to cleaning, but also saves water. For the squatting toilet, the main function is to flush, and whether the squatting toilet pipe design is scientific and reasonable is the factor affecting the flushing. Pay attention to these when buying.

1. First of all, lift the toilet lid and handle it gently.

>2. You can see that there are two black rods on the toilet lid, which can be adjusted to control the strength of the button. Don't adjust it too long.

3. If you do not use it or overflow water, you should pay attention to the position of the overflow pipe to see if the storage position is higher than the overflow pipe.

4. If the water level is higher than the overflow pipe, you need to adjust the position of the float on the left side, and the white rod in the rotating circle can adjust the high and low position of the float. After a few rotations, you can release some of the water and observe the water level when the water storage stops.

5. At the same time, you can also see that there is a yellow block in front of the water release button, which can be moved up and down to adjust the toilet drainage.

If you need the water level to be higher, twist it counterclockwise, if you need the water level to be lower, adjust it clockwise, don't twist it back and forth, be patient, twist it a few times to try, and then twist it a few times and try again, and you will get the water level you need after a few times.

The white center part in the lower left corner is the adjusting screw, which is plastic, which can adjust the height of the float. I can't remember exactly which direction, you can try to rotate to the right

Popular science knowledge, how to adjust the water level of the toilet tank.

The toilet tank regulates the water level, and there is a water inlet component directly in the tank.

I believe that many people will encounter toilet water level problems. So do you know about how to regulate the water level in the toilet? If you don't know, then let's learn the knowledge of toilet tank adjustment together!

There are screws in the water tank on the water, and there is an iron that pinched the iron in the middle of the iron and pulled the iron upwards to turn it down, and down to it is high, you open the toilet with a comic lid, and you can see the ball connecting rod mechanism inside. There is a screw on top of it and you can see that there are screws to adjust it up, and you can meet your requirements. The water level is low, so you can save water.

The easiest way to save water is to put one or two bottles of beer filled with water in the tank, each bottle can take up about 700 millilitres.

How to adjust the toilet (toilet) water piece.

1. Installation and adjustment of water inlet valve.

The inlet valve is installed in such a way that the make-up pipe is not discounted or hindered from the work of other parts. )

2. The water volume adjustment of the water inlet valve and water tank is as shown in the figure, first screw the card of the water inlet valve to the "OPEN" direction. Then pull the inlet valve body to make the inlet valve as a whole raise or lower. The lock and loosening of the card can be found in the logo of the water inlet pipe.

3. Fine-tune the water level of the water inlet valve and water tank.

As shown in the figure, the adjustment lever can be adjusted to raise or lower the water level of the water tank. When the adjustment lever is rotated counterclockwise, the float box descends and the tank water level decreases. On the contrary, by rotating the adjustment lever clockwise, the floating box rises, and the water level of the tank rises.

<><1. How to adjust the water level of the toilet tank.

1. First of all, lift the upper cover of the toilet tank, and you can see that there are two black pillars inside the water tank.

2. Adjust the position of the two black pillars on the toilet lid to one high and one low, so that you can adjust the strength of the water tank buttons.

3. If the water level of the toilet is higher than the overflow pipe, it is recommended to rotate the white rod to try it, so that the upper and lower positions of the float can be adjusted.

3. Finally, move the position of the small yellow block before the water discharge button to adjust the water level. Replace the tank lid and the water level will be adjusted.

Second, how to use the toilet frankly and more water-saving.

1. Bend the float handle in the tank down to reduce the water storage capacity of the water tank, because the height of the float is closely related to the water storage capacity of the toilet. The higher the float, the greater the water holding, and when the float is lower, the water retention decreases. This serves the purpose of saving water.

2. Put a bottle of mineral water full of water or put some pebbles in the toilet tank, so that the water inlet of the water tank becomes lower and the purpose of saving water is also achieved. If the volume of the water tank is small, it is recommended that the bottle is not too large, otherwise it will cause the toilet to not have enough water and not flush cleanly.

3. The water left by the daily washing machine can be collected in the bucket first, and then used to flush the toilet, which is also an environmentally friendly water-saving method.

4. There are many types of toilets, the flushing volume of ordinary toilets is 12-15 kg, and the flushing capacity of water-saving toilets is about 6-9 kg.