-
Anonymous users2024-01-24It must be connected to the septic tank, if there is one, it will be purchased and installed directly, if not, it will be very bad.
1. According to the sewage outlet of the installed product, reserve the sewer pipe at the appropriate position from the wall, and determine the distance between the inlet of the sewer pipe and the ground level, and pay attention to match the pit distance of the squatting toilet. Pit distance refers to the distance between the center of the toilet sewer pipe and the wall, generally 300mm, 350mm, 400mm, 450mm, etc. Choosing the right squat toilet is the first thing to choose is to choose the right pit distance. >>>More
Installation process:
Before installing the toilet, the sewage pipeline should be comprehensively inspected to see if there is mud, sand, waste paper and other debris in the pipeline, and at the same time check whether the ground of the toilet installation position is horizontal. >>>More
The installation of the squat toilet still needs to be quite careful, because the installation of the wrong words is likely to lead to future leakage or water pressure is not enough, this kind of technical work should still be handed over to skilled workers, because the installation of squat toilet this technical work determines the quality of the use process in the future, although the installation of the common toilet type installation problem of the squat toilet is not a big problem, but it is by no means a casual installation, after all, the water flow of the toilet, water pressure can be normal depends on whether the installation is in place. Installation method:1 >>>More
One can be odor-proof, two will inevitably affect the two s elbows, and the feces will definitely remain in one s The pipe you buy can make as many holes as you buy In fact, it is not so troublesome When you go to buy squatting poop, there will be workers in the store You can pay an installation fee If you install it yourself, there is no professional punching equipment A hole seems to be 8-10 cm
It is necessary to bury the matching special embedded parts on the partition wall first, and install the toilet on the wall through the bolts on the embedded parts.