-
Anonymous users2024-01-23It is necessary to bury the matching special embedded parts on the partition wall first, and install the toilet on the wall through the bolts on the embedded parts.
-
Anonymous users2024-01-22The wall-hung toilet must first match the size of the concealed water tank, pay attention to the distance between the water inlet and the screw and the screw and the water outlet, and the connection between the water tank and the toilet depends on these three aspects. Then once the concealed cistern is installed, the height of the toilet is basically set, but there are still differences between different toilets, if you want to have the most comfortable height, pay attention to the distance between the toilet plane and the ground on the toilet size, generally ranging from 40-45 cm.
-
Anonymous users2024-01-21Unless it can only be a toilet, the steps of the toilet installation method are the same no matter what brand of toilet.
It should be noted that the rubber mat at the bottom should be in a good position, otherwise there will be a smell, otherwise it will not drain well.
In addition, use white cement to smear the bottom around the toilet, do not fix it with expansion screws, it is completely unnecessary!
It is best to connect the hose before installation, otherwise the position of the toilet is difficult to operate after it is fixed!
At present, Kohler has two fully intelligent toilets, the price is slightly lower is Kohler Xinyue integrated super sensing toilet, the technology used is: ILH instantaneous constant temperature heating technology, electric power flushing, touchless automatic induction cover opening technology, automatic flushing, intelligent cleaning, self-cleaning of flowing water nozzle, intelligent LCD flat touch remote control, warm air deodorization, seat heating and other technologies.
There are two screws on the back of the back of the flat back of the toilet, remove the two screws, pull the toilet lid up and down, if there are no screws, there are two round lids at the back of the toilet lid, open the round lid, and use a screwdriver. >>>More
The wall-hung toilet can effectively store space, save space, and make the bathroom look more open, which is very suitable for small bathroom places. Generally speaking, the size of the wall-hung toilet that is more common in the household will choose 220mm pit distance. >>>More
1. According to the sewage outlet of the installed product, reserve the sewer pipe at the appropriate position from the wall, and determine the distance between the inlet of the sewer pipe and the ground level, and pay attention to match the pit distance of the squatting toilet. Pit distance refers to the distance between the center of the toilet sewer pipe and the wall, generally 300mm, 350mm, 400mm, 450mm, etc. Choosing the right squat toilet is the first thing to choose is to choose the right pit distance. >>>More
The installation of the squat toilet still needs to be quite careful, because the installation of the wrong words is likely to lead to future leakage or water pressure is not enough, this kind of technical work should still be handed over to skilled workers, because the installation of squat toilet this technical work determines the quality of the use process in the future, although the installation of the common toilet type installation problem of the squat toilet is not a big problem, but it is by no means a casual installation, after all, the water flow of the toilet, water pressure can be normal depends on whether the installation is in place. Installation method:1 >>>More