-
Anonymous users2024-01-24The water pipe is blocked, the water is less, and there is gas in the pipe (remove the sewer pipe at the mixing valve to let the water flow out of the exhaust automatically, and install it after the water flow is full and the pipe is out of gas, pay attention not to burn).
It will not be unsuitable, and the general faucet is a DN15 joint with a hose. As long as it is a professional plumber, it will do. You didn't say anything about the location of the water leakage, so it's hard to say, generally the faucet is not closed tightly because the ceramic core inside is not tightly pressed by foreign bodies. So it's not tight.
The water purification faucet has a special faucet, which is generally a very thin kind of water outlet pipe, and the water purification faucet should be selected to avoid secondary pollution. If it is used in combination with ordinary hot and cold faucets, the water will be slow to dispense, and the water will be wasted in the outlet pipe.
Up to 75, 85 in case of temperature control failure
There will be a little impact, if you use it for a long time, it will greatly accelerate the aging rate of the valve core, resulting in water leakage,,, but the valve core can be replaced, just two dollars.