Where is the inlet gate of the toilet, my toilet does not have floats

It's all on the left.

Before disassembling the toilet inlet pipe, you should prepare a water inlet valve set to be reinstalled, as well as items such as common screwdrivers. Then it is necessary to make preparations and turn off the water inlet switch under the toilet tank, so that no more water will enter it, so that the water inlet network pipe can be replaced later. It's no longer just about draining the toilet tank with water. >>>More

How to adjust the toilet float - situation 1: If you want to lower the water level in the pit, open the water inlet valve on the left side of the water tank cover and have 1 thin leather pipe called the water supply pipe, which is generally inserted into the drainage valve on the right, and pull the right side up directly in the water tank, so that the water in the pit will not be too high when the water enters the water next time. >>>More

At the top, the water in the tank flushes down at the push of a button.

Hello dear, you can directly put the toilet cleaner into the toilet tank without floats, which can achieve better use results. In order to prolong the use time, because the toilet cleaner protective film dissolves when it comes to water, take out the toilet cleaner and keep the protective film away from the water outlet, and the toilet cleaner will slowly dissolve in the water. If it is the first time to use it, it will need to sit in the tank for at least 10 minutes, so please do not tear off the outer protective film and place it under the tank float. >>>More

It should be burned out after the water is cut off, and see if the water heater has a protective device.