Waterproofing is divided into back water and welcome water, so please ask my bathroom and kitchen ar

Updated on Bathroom 2024-08-30
3 answers
  1. Anonymous users2024-01-24

    Hello! In fact, the kitchen and bathroom are said to be waterproof, and it is necessary to focus on the two areas of waterproofing, because these two areas have flowing water all year round, and it is relatively humid, so if you do waterproofing in the bathroom, all walls and floors are facing the water, because they are in direct contact with the water source, and the back, the place that does not touch the water is called the back water surface, generally speaking, the bathroom wall should be meters high, and the kitchen should also be meters high, because the kitchen is also the water surface, there is daily water from the kitchen, Of course, there is also a very important area in waterproofing is the waterproofing of the back water, and we do the waterproofing of the family wheel banquet, which must be done in the safest and most holistic way, so it is also recommended that you do the same waterproofing on the back water. Achieve waterproof and moisture-proof effect.

    When in doubt, please ask.

  2. Anonymous users2024-01-23

    No, you don't. If the "prevention" of the frontal surface fails because it is not done well, the "blocking" of the backwater surface is useless against the brick wall --- cannot be blocked. From the perspective of waterproof and moisture-proof housing construction, there are not only "water leakage", "water seepage", but also a "water climbing" problem.

    You can understand that water flows low, but water can also "climb" to high places - the principle of kerosene lamps --- burns kerosene, but kerosene is underneath the lamp. The brick wall is a masonry with a high water absorption rate, so there is a cement mortar moisture-proof layer at 5 cm below the floor in the general basement, the purpose is to prevent the water below the ground from "climbing" along the wall together with the concrete floor.

  3. Anonymous users2024-01-22

    Bathrooms and kitchens need to be waterproofed.

Related questions
2 answers2024-08-30

Solid wood doors:

Solid wood door is a big concept, which generally refers to a wooden door made of natural logs or solid wood laminated timber taken from the forest. Many people will default to solid wood doors as log doors, but solid wood composite and solid wood multi-layer can actually be collectively referred to as solid wood doors. >>>More

6 answers2024-08-30

It's basically the same, except that roofing waterproofing can be considered with cheap asphalt, tarpaulin. The indoor needs to use environmentally friendly, harmless waterproof materials, such materials are expensive. Different materials are made differently, and that's the difference.

3 answers2024-08-30

Rigid waterproofing and flexible waterproofing have different characteristics. Rigid waterproofing material has greater strength after use, and flexible waterproofing material has softer strength after use. The former does not change with the external environment, while the latter can change with the external environment. >>>More

1 answers2024-08-30

The integrated ceiling is easy to remove when needed. The integration is aluminum. The previous one was plastic. There are also fir gussets. Now integrated ceilings are also much cheaper.

2 answers2024-08-30

In KFC, it is roughly divided into service area and production area, the service area is the front desk and hall, and the production area is the general distribution and kitchen, to put it simply: >>>More