-
Anonymous users2024-01-24In order to stop the leak, you must first find the leak point. If there is a leakage point, the base surface treatment is carried out at the location of this leakage point, and the crack can be repaired with Leibangshi Leak Plugging King. For a little more protection, apply a flexible slurry on top.
Truly achieve the effect of waterproofing. Because these materials are cement-based waterproof coatings, they can only be applied to solid, flat and clean substrates, and cannot be applied to tiles or other substrates that cannot meet the requirements.
-
Anonymous users2024-01-23You do it yourself, it is recommended to use polyurethane, this is better to do, clean the base layer, brush the first time with a brush, brush the second time after drying, and the third time.
Let's use polyurethane.
-
Anonymous users2024-01-22Waterproofing still has to be done, and it has little to do with whether the tiles are pasted or not.
-
Anonymous users2024-01-21It's good to buy some waterproof paint to wash down, it has little to do with tiles.
As long as the waterproof construction is no problem, any waterproof material will do. Now it is generally polymer polypropylene cloth + 108 colloidal cement slurry, which is relatively cost-effective.
It should be a tile hollow. It is the waterproof material that acts as an insulator. I hope my answer can help you.
You can use a hanging net, set up a hanging net outside the waterproof cloth, and then use special accessories to paste the brick.
The waterproofing of the bathroom must be done on the base surface, not in the tiles or tile joints. If the base surface of the bathroom is waterproofed, then the tile surface does not need to be waterproofed.
Under normal circumstances, after 2-3 times the waterproof layer is all done, there will be a curing period of 5-7 days, so the tiles are done after curing.