-
Anonymous users2024-01-24Because the wood year of the wood floor may be different, the stability of the wood floor made of the wood for a long time is definitely better than the stability of the new wood, so the thermal expansion and contraction of the situation is different, and it can be said that the deformation of each piece of wood floor is different. And it also depends on where you have wooden floors, and the places near the bathroom that are more humid or close to the balcony are of course different from other places. Then there is the fact that you have been cheated by someone, not all of them are the same kind of wood, or there is a certain relationship with the poor workmanship.
-
Anonymous users2024-01-23In the production process of solid wood flooring, there is a problem with drying, resulting in poor stability of wood flooring and shrinkage, which can be complained to the manufacturer
There are many reasons why a solid wood lock floor arches. One is the quality of the floor itself, the moisture content is not well controlled, and the floor is dry and deformed, which is mainly reflected in the end cracks and the arching of the floor There is also a reason that the moisture-proof is not done well when the floor is installed, which causes the floor to be tiled, so that the floor is arched on both sides There is also a reason that the corners are warped due to the tight lock, which should be judged according to the deformation of your floor and the actual environment
Indonesian rosewood flooring.
Siming District, Xiamen City, Fujian Province. >>>More
The joints of the floor are not glued tightly, and they are prone to rattle. There is no way, or all up and start from scratch.
If there is a problem with the sealing of the joint, it may be that the sealing ring is not installed properly or the sealant is not properly installed.
If there is a small amount of paint loss on solid wood furniture, then you can remedy it with a little nail polish in the part where the paint has peeled. But if you drop a lot, then you can use old books or waste newspapers, alum, and frost paper, cut them up, and then add the scraps to the alum and cook them into a paste, and then wait for the paste to dry and harden and apply it to the part where the paint has fallen to remedy. >>>More