Ask for a complete set of CAD panel furniture drawings and send me a copy as well

Divide the plan, the elevation, the inner elevation and a side view of the axis.

First of all, the process of pinning macro dissolution board furniture, otherwise the design of the east and east can not be processed! Cloakroom: Considering the length and height of the room, the general board is 1220*2440.

The thickness of the plate is a problem, and the amount needs to be collected. THE SIZE OF THE CLOAKROOM: THE HEIGHT OF THE COAT, THE HEIGHT OF THE COAT HANGING (1250MM OR MORE), THE HEIGHT OF THE SUIT AND CASUAL WEAR (950MM OR MORE), THE POSITION OF THE SHOES, THE HEIGHT OF THE TROUSER RACK, THE POSITION AND HEIGHT OF THE TIE COMPARTMENT, ARE ALL DETAILS OF THE DESIGN.

Cabinets: The structure is the same as the cabinets in the kitchen. The general height is slightly different according to the processing technology of each factory, but the overall frame will not be the national standard 32 series.

According to the customer's requirements (stored items and electrical appliances) into the cabinet reasonably. Bookcase: Consider the customer's requirements first, filter out the customer's unreasonable suggestions, and then make an overall plan according to the customer's room layout (existing conditions).

The width of the bookcase is generally between 320-380, and the spacing of the partition according to the number of broken books of the national standard 32 series needs to pay attention to the size of the customer's book. Whether the spacing between the side plates is divided evenly according to the total length or divided into inequalities. (It is enough to communicate with the design and the customer) for example:

IT CAN BE DIVIDED INTO 480-960MM PITCH. PAY ATTENTION TO THE THICKNESS OF THE PLATE, AND TRY TO BE WITHIN 720 OF 18MM. If it is too long, it is easy to collapse the waist.

Plate structure bookcase if to do the door. Generally, a straight arm 110-degree door hinge or a suspended push-pull is used. IF THE BOTTOM IS USED AS A DOOR, THE HEIGHT OF THE DOOR SHOULD NOT EXCEED 850MM.

Depending on the understanding of the plate structure of the design, a variety of styles can be made. Note: Try not to make special-shaped things for plate structure products, and can do up to 45 degree corner cabinets.

However, the surface can be changed arbitrarily, such as arc-shaped and oval office desktops, but the sliding cabinet under the surface is straight and right-angled.