Points for laying hardwood floors

If you want to lay solid wood flooring at home, you need to understand the specific process and steps. What are the key points of solid wood flooring? PChouse will take you to find out.

1. The floor should be laid in the later stage of construction, and no cross construction should be allowed. It should be sanded and painted as soon as possible after laying. This will prevent the floor from collapsing or deforming due to moisture.

2. Before laying the floor, it is advisable to unpack and stack it at the laying site for 1-2 days to adapt to the environment, so as to avoid expansion and contraction deformation after laying.

3. Moisture-proof measures should be taken for laying, especially in humid occasions such as the bottom layer. Moisture-proof measures include coating moisture-proof paint, laying moisture-proof film, using bedding treasures and so on.

4. The keel should be flat and firm, and it should not be reinforced with cement, and it is best to use expansion bolts, Meigu nails, etc.

5. The keel should be made of larch and liu'an with strong nail grip. The moisture content of the keel or rough floor should be close to the moisture content of the floor. The keel spacing should not be too large, generally not more than 40 cm.

Both ends of the floor should be implemented on the keel, not empty, and each keel must be nailed with nails. Water-based glues should not be used.

6. The floor should not be paved too tightly, there should be enough expansion joints around it, and it should not be laid ultra-widely.

1. The floor should be laid in the later stage of construction, and no cross construction should be allowed. It should be sanded and painted as soon as possible after laying. This will not stain the floor or deform it with moisture.

2. Before laying the floor, it is advisable to unpack and stack it at the laying site for 1-2 days to adapt to the environment, so as to avoid expansion and contraction deformation after laying.

3. Moisture-proof measures should be taken for laying, especially in humid occasions such as the bottom layer. Moisture-proof measures include coating moisture-proof paint, laying moisture-proof film, using bedding treasures and so on.

4. The keel should be flat and firm, and it should not be reinforced with cement, and it is best to use expansion bolts, Meigu nails, etc.

5. The keel should be made of larch and liu'an with strong nail grip. The moisture content of the keel or rough floor should be close to the moisture content of the floor. The keel spacing should not be too large, generally not more than 40 cm.

Both ends of the floor should be implemented on the keel, not empty, and nails must be nailed to each keel. Water-based glues should not be used.

6. The floor should not be paved too tightly, there should be enough expansion joints around it, and it should not be laid ultra-widely.

7) The floor and the hall, bathroom, kitchen and other stone ground junctions should have thorough isolation and moisture-proof measures.

8) The color difference of the floor is unavoidable, if there is a higher requirement for the color difference, it can be sorted in advance and a gradual transition method can be adopted to reduce the sense of visual mutation.

9) Do not rinse with water during use, avoid long-term sun exposure, continuous direct blowing of air conditioners, and prevent rainforest and hard objects from hitting and rubbing at the window. To protect the floor, waxing can be done on the lacquered surface (waxing is better than painting from the point of view of protecting the floor).

1. It should be sanded and painted as soon as possible after laying. This does not stain the log floor or deform it with moisture. Before laying the log floor, it is advisable to unpack and stack it at the laying site for 1 2 days to adapt to the environment, so as to avoid expansion and contraction deformation after laying.

Log floors should be laid at the later stage of construction and should not be cross-constructed.

2. Solid wood itself has the phenomenon of thermal expansion and cold contraction, and the use of wooden dragon skeleton is mainly to prevent its shrinkage. However, it is not very clear how effective it will be, because it is not something that can be found in a day or a few days, and it will take several years to know the exact effect. If the ground is leveled, the log floor can be tiled.

However, after leveling, the ground is hollow due to various reasons, which will affect the future use, and there may be sound.

3. When tiling the log floor, the spring sheet is placed in the place where the floor is in contact with the wall, which can prevent the expansion and contraction of the floor caused by thermal expansion and contraction, and the floor spring can control the expansion joints back and forth on the floor according to the thermal expansion and contraction of the floor. It can replace the keel and is easy to use. Only 3 pieces of floor per square meter are placed against the wall.

4. The wooden floor and the stone floor junction such as the hall, toilet and kitchen should have thorough isolation and moisture-proof measures. Moisture-proof measures should be taken for laying, especially in humid occasions such as the bottom floor. Moisture-proof measures include coating moisture-proof paint, laying moisture-proof film, and using bedding treasures.