-
Anonymous users2024-01-24This does not have to be protruding, the protrusion is so that the cassette can be flush with the tiles in the future, and it is easy to install ordinary screws when installing the socket; But there are also advantages to not protruding, that is, the distance from the tile surface to the bottom of the cassette is increased, the larger the internal space increases the space for the wire, and the heat dissipation conditions of the wire and socket module are better.
-
Anonymous users2024-01-23Fixed cassette: Except for the kitchen and bathroom cassette, which should protrude 20mm from the wall, other cassettes should be flush with the wall. Several cassettes are required to be on the same level when they are together.
After pasting the tiles, the thickness of the original wall will generally increase by about 20mm, and the installation of the face box is compared. Some workers did not do this, mainly because it was easier to paste the bricks. In the end, it didn't have much effect.
-
Anonymous users2024-01-22It should be for the installation of the upper box when tiling in the future, if it is not protruding, then you will have to buy long screws in the future.
The protrusion of the wall tiles may be due to the poor waterproofing of the home, the waterproofing is to stabilize the structure, and there will be no infiltration, dampness and other scattering, and the brushing is to make the tiles more stable, strong grip, not easy to produce detachment >>>More
Bathroom brushing is a wall treatment to prevent wall problems caused by moisture resurgence. >>>More
Brushing is to make it easier to grasp the wall and not fall off, and hollowing, brushing is a project that occurs after the wall is leveled.
Holes are drilled for exhaust gases.
Before pasting tiles, the original cement wall should be treated, the pit surface should be chiseled, and the wet spray should be sprayed to increase the area attached to the tile.