-
Anonymous users2024-01-24Now that business is difficult to do, many brands provide dismantling and installation of a leading service. Even if you don't provide it, you can buy a new one and find someone to install it. Charges range from 80 to 100Because the old toilet is being dismantled, it is dirty, and the workers are not willing to do it.
-
Anonymous users2024-01-23If you buy any brand of toilet, as long as it is a big brand, the price is not too low, and Qianba.com will be responsible for dismantling and installing it for you, in fact, the installation fee has long been included in the total price of the toilet.
-
Anonymous users2024-01-22Generally, there is! You can go to the store and discuss with the store! But the cost of demolition will be a little bit!
-
Anonymous users2024-01-21You can go to the major stores for consultation.
Changing the toilet can have the following troubles:1Need to disassemble the old toilet: >>>More
3 All toilets are broken, see where the problem is. If it is a squatting toilet, you can try to change the water tank, if it is a toilet water problem, you can try to change the water tank accessories (water inlet valve and drain valve), which is relatively simple and can be solved by yourself. If you change the whole toilet, it will be more troublesome, you have to remove the old one and then replace it with the new one, you can't do it yourself, you must first measure the pit distance to change the toilet, choose the pit spacing, and choose the right toilet according to the pit spacing.
There is no direct correlation between changing the toilet and the weather.
The water seal is lower than the drain port, first check whether the water outlet hose of the water accessories in the water tank is inserted into the water fittings, which is to supplement the water level of the water seal, and the national standard requires the water seal to be more than 5 cm higher than the highest point of the drain outlet. If the tank is normal, it's still like this, just replace the toilet.
It's not very troublesome: the installation of the toilet is mainly the bonding of a water pipe (solved by a section of hose), and then the docking of the lower water pipe and the toilet outlet (now there is a rubber ring to solve). If these aspects are solved, it will be solved logically.