-
Anonymous users2024-01-243 All toilets are broken, see where the problem is. If it is a squatting toilet, you can try to change the water tank, if it is a toilet water problem, you can try to change the water tank accessories (water inlet valve and drain valve), which is relatively simple and can be solved by yourself. If you change the whole toilet, it will be more troublesome, you have to remove the old one and then replace it with the new one, you can't do it yourself, you must first measure the pit distance to change the toilet, choose the pit spacing, and choose the right toilet according to the pit spacing.
Changing the toilet can have the following troubles:1Need to disassemble the old toilet: >>>More
It's not very troublesome: the installation of the toilet is mainly the bonding of a water pipe (solved by a section of hose), and then the docking of the lower water pipe and the toilet outlet (now there is a rubber ring to solve). If these aspects are solved, it will be solved logically.
Replacing the toilet is not too much of a hassle and does not cause damage to the floor of the bathroom. >>>More
Generally speaking, it is better to use the lower row type, and it is no problem if you can only install the side row type, which is a little smaller than the lower row suction.
In fact, it is not troublesome, it is very simple, and it is even more fine if the former owner is careful when using the toilet. It may be an old toilet with anchor screws, so it will be troublesome, and the anchor screws must be removed. Besides, finding a place to buy a toilet and let them install it is very simple. >>>More