-
Anonymous users2024-01-24Use a wallpaper knife to cut off the glass glue stuck between the floor and the toilet bowl Be sure to cut it thoroughly, put the toilet diagonally or put it down, take off the old flange ring, put on the new one, move the toilet back to its original position, and glue it.
-
Anonymous users2024-01-23Remove the two fixing bolts and you can replace the toilet seat with a new one.
Remove the broken toilet seat. Under the outside corresponding to the fixed position of the toilet seat, you can remove the toilet seat by feeling a new screw by touching it with your hand and loosening it. Two: >>>More
If the toilet seat is broken, the original toilet seat should be removed first, and the specific replacement steps are as follows: >>>More
The kind of cloth that you bought? Those are all connected together with a hook and loop, and you can pull the hook and loop together. If you have a plastic ring on the toilet, there is a plastic screw on the shaft, so you can unscrew it.
When installing the toilet tank inlet kit, the spike base and nut of the inlet valve should be removed first. Align the inlet hole of the tank and insert it into the lower end of the inlet valve. Attach the plastic gasket and nut and tighten it firmly. >>>More
Netizens provide solution 1: When changing the toilet lid, we need to remove the fixing bolts on the back of the toilet to replace it; When installing, you can operate in the opposite direction. There is no difference in size of the general toilet seat, just adjust the two bolts when installing. >>>More