How can you tell if furniture is solid wood?

One: Recognize the difference between artificial thin wood veneer and natural wood veneer. The texture of the artificial thin wood veneer is a straight texture, and the grain pattern is very regular; The texture of natural wood veneer is a natural wood pattern, and the natural variation of the texture pattern is relatively large and irregular.

Two: Pure wood has its own special taste, while wood-based panels will have a strong smell of chemical materials.

Three: Solid wood parts will make a crisp sound when tapped by hand, while wood-based panels will have a low sound, and the wooden parts of the box will make a drumming sound.

Four: wood furniture is lighter than particleboard, MDF furniture.

According to the provisions of the new national standard of "General Technical Conditions for Wood Furniture", all solid wood furniture refers to all wooden parts (except mirror supporting plates and pressing strips) made of solid wood sawn timber or solid wood panels; Solid wood furniture, that is, furniture whose base material is made of solid sawn wood or solid wood plank, and the surface is not covered; Solid wood veneer furniture, that is, furniture made of solid sawn wood or solid wood planks as the base material, and covered with solid wood veneer or thin wood (veneer) on the surface.

AnswerThere are many kinds of solid wood, beech, elm, ash, oak, pine, fir, sax, camphor, etc., and the most common one used in China is oak. Pine and fir are poor, ash, beech and elm belong to the upper medium, and the upper is the mahogany series. How to distinguish real from fake solid wood?

1.Scarring: Look at the location of the scarred side, and then look for the corresponding pattern on the other side.

2.Wood grain: The appearance seems to be a pattern, so according to the position of the pattern change, look at the corresponding pattern on the back of the cabinet door, if it corresponds well, it is pure solid wood.

3.Cross-section: The color of the cross-section is darker than the panel, and it can be seen that it is made of a single piece of wood.

Second smell: Pure wood has its own special taste, while wood-based panels will have a strong smell of chemical materials, such as formaldehyde, which is easy to identify. Three knocks:

Solid wood pieces will make a crisper sound when tapped by hand, while wood-based panels will have a low sound, and the wood parts of the box will make a drumming sound. Four: It is the weight, wood furniture is lighter than particleboard, MDF furniture.

Finally, you can observe the wood: open the furniture cabinet doors and drawers to observe whether the wood is dry and white, and whether the texture is tight and delicate. If you have furniture made of materials such as particleboard, MDF and one-time molded board, open the cabinet doors or drawers and smell them for pungent odors.

Can't I send a picture if I ask a question?

I want the teacher to put down some solid wood.

Beech, elm, ash, oak, pine, fir, sedge, camphor, etc.

Question: Is the multilayer board solid wood?

Thank you, teacher, for your question.

If you buy solid wood furniture, you can ask to see the cut surface!! You can see it like the cabinet.